Sounds to me like the master cylinder seals are faulty, providing that nothing else is leaking. When you did your brakes did you replace the M/C?...
A 327 will run at 3400 rpm, but it would be much better to cruise at 2700 and yes your engine will last a lot longer at the lower rpm's. I'd...
RE: Vent Window Seal Replacement >So, since my rivet tool is on back order, you're saying I'd >be better off saving my money and using the...
It's a fairly easy swap but you have to take time to convert the old underdash harness to gauges. You can do this using the wiring diagrams; it...
You've obviously put a lot of hard work into your truck and you should be proud of the results! Nice job!!!!:D
Well, I found the rivet setting tool to be just about useless in most aplications. For riveting the long seal to the divider bar, the trusty old...
[updated:LAST EDITED ON Apr-16-03 AT 04:59 PM (CST)]Butch is correct about the lubricant value of lead. Leaded fuel was the single biggest...
It's nice to see something different! Looks like a neat project!
You know, our hosts (Chevyduty) has reproduction pairs for a hair over $50 and I can attest to the high quality and attention to detail!
Well, those bolts do tend to be a pain in the arse....I used a 1/2" drive ratchet with a 3' pipe for a cheater bar! Use at your own risk...
dvalentine knows his stuff (as usual :) )....the cab may not be worth saving if it has leaked too badly. Just for reference, I bought a new cab...
I ran into this on my 65. It turns out that the drums are riveted on!!! Those three "guide pins" are actually rivets! I chiseled/drilled mine...
My understanding is that the Dexron III Auto. tranny fluid is compatible. Havoline, Penzoil and others all offer this type; like I said I'm...
[updated:LAST EDITED ON Feb-23-02 AT 03:04 PM (CST)]Okay Arizona, I found plenty of dilapidated seats that are screaming to be parted out!...
How much of the bracket are you looking for? From the floor up to the track or.... I'm heading to the yards tomorrow so if you email me tonight...
If I remember correctly, theres a spring washer behind the handle and the handle is held in place with a roll pin, similiar to what the column...
Hi Hugh, sorry to hear about your cab; been there done that on my 65! I'm in Oregon, so this probably won't help you much but I can think of...
Hi, does anybody happen to have a 64-66 Chevy truck AM radio lying around? Been looking for one; if you've got one, my email is:...
Well I'm glad you resolved the problem BEFORE the engine was damaged!!;) I did have an oil pump on a smallblock go onetime. Actually, one of the...
Sound pretty cool! I honestly have no idea of the value, but I suspect that to the right person, it would have incredible value. If I were you,...
Separate names with a comma.
