I got a new set of Accel plug wires today. I tried following the instructions on how to assemble the wires, but I'm having a little trouble. The...
If you can't pull the rest off and have to pull the oil pan off, you should be able to pull it off without raising the motor. I've been told that...
I used to work in a shop, and I remember helping one of the guys bleed a slave cylinder. He basically did the same thing your brother told you to...
I would think the easiest way to check them would be pull the valve cover off while the motors running. I'm not sure what else you could do for...
When you get ready to start it, take your left hand and pull the shifter up and hold it there. Then, turn the key with your right hand. They...
I hate electrical systems. Check your grounds. Could possibly be a bad starter. If that doesn't work, there could be something wrong with the...
A few things could be wrong. The EGR valve maybe sticking, or you may have a valve sticking. How does it sound when it's running? Does it lope,...
I feel your pain. I had to put my starter back on Wednesday, and it got heavy...QUICK!! You should be able to get it lined up with the motor in...
Yes sir, back when gas was cheap nobody believed in good fuel mileage, just how much power you could get. Cowboy, valve springs wont help you...
I'm having some trouble with my 74 c10. I had a 2bbl intake, but when I started rebuilding, my uncle gave me a 4bbl. I've got it all back...
I don't deal with 4x4's much, but I don't think it would hurt to put a 2wd on a 4wd as long as the tailshaft's are the same length. If you go with...
I would pull the plugs out and check them. Make sure to get any rust off that may be on them, or just buy new ones. There may also be water in the...
RE: Engine will not start. Engines are funny sometimes, odd how something happens, and it's one of the things you think wouldn't break. We had an...
On most of the 6 bangers I saw from this period, the majority were blue, except for the ones that people had painted orange. The way I always...
RE: Engine will not start. I agree with DV, since rotor buttons aren't that expensive anyway, I would put a new one on. Another cause could be...
I got a big problem. I got an 88 Blazer 4.3. The oil pressure had been down around 20 psi at idle, then it was around 15 wile driving. It's been...
If that emissions tag is correct, the year would be in the bottom sentence about conforming to EPA regulations, but it appears to be scratched...
I don't beleive those are stock lenses. They're called Euros, if it's the ones I'm thinking about. They will have to be special ordered, if they...
Well, on SOME engines the location of the oil dip stick will suggest engine size. If it's on the driver's side it would be a 350, on the passenger...
Separate names with a comma.
