Well if the number on the door post is missing your in trouble. That is what everone looks for when you go to sell it. But you can look on the top...
Well the first Digit identifies the model year. For example 3C153f100110 The number 3 tells you it is a 1963. The second digit tells you the truck...
No there was no option available like that sorry Rick Bradley tech2@chevyduty.com 816.741.8029 ext. 500 816.741.5255 fax
From what I can tell in my book it is light blue. The paint code crosses to a #12846. And your trim color is Ivory paint code #8290 And the...
I have been told they bolt Right up you will have to oblong a hole. Now this is only hearsay so if someone on here can confirm or deny this please...
That is a part you can pick up at you local auto part store I think Moroso sells it Rick Bradley tech2@chevyduty.com 816.741.8029 ext. 500...
IM sorry for such a delay in response. I looked and both of our lens and they have Guide 8t sae IP 71 on them. Why don't you send that one back...
Well you did not say if you had a stepside or fleetside. So here is both ways to install them Rick Bradley...
Yes it is the same the only difference is the little plastic push in pieces are in different places. Send it back and we will exchange it for you...
It is allot easier to go out and buy a wiring harness and plug it into your gauge type dash Rick Bradley tech2@chevyduty.com 816.741.8029...
Well first off is your fuel cell above or below your license plate filler? and no you can not use radiator hose as your filler hose. It will...
Sounds like you need part number 78-758 look and see if this will help you out http://www.chevyduty.com/forum_pics/retainer.jpg Rick Bradley...
Here you go let me know if you need anything else http://www.chevyduty.com/forum_pics/64-66wiringrear.jpg Rick Bradley tech2@chevyduty.com...
Here you go can't help if it not clear it is a original copy http://www.chevyduty.com/forum_pics/64-66wiringunderhood.jpg Rick Bradley...
Here you go i hope this helps you out if you need anything else let me know http://www.chevyduty.com/forum_pics/64-66wiring.jpg Rick Bradley...
Well you can put a 3:08 gear on a 4 series carrier just and more shims. But you can't put a 4 series gear on a 3 series carrier. It is do to the...
Well the two holes your referring to are for fuel injection return lines. As for the sending unit it has a o-ring then the sender then the locking...
Meddler is right it is a complete swap over. Just take your time it is a weekend job but defiantly worth it Rick Bradley tech2@chevyduty.com...
Well in the middle of your bumper in the dip should be 2 holes. The license frame bracket bolts up there and to the rear cross sill of the bed...
We have the right one here is a pic tell me if it looks like yours http://www.chevyduty.com/forum_pics/ubolt.jpg Rick Bradley...
Separate names with a comma.