I feel your pain. The truck that I bought and am currently restoring had some of these faults. I found wood screws holding the interior trim,...
8 LUGS!
Sounds like you have a 4.56 ratio diff. My C20 with 245/70/16 turns 3000 rpm at 65 and i do believe to have a 4.11 in my 14-bolt 10.5 ring diff.
RE: GMC 305 V6 Hard to find par Back when the Mayflower was sailing, my grandfather had a 1963 3/4 ton with the 305 V-6. Also, I was thumbing...
Check your address, it is www.drivetrainsuperstores.com 79 C20 Bonanza 350/400 4bbl Q-Jet 3.73 14-Bolt Corp.
RE: '56 3800 - Need alternative to Could one use a 16" 8 hole rim. On my 79' I had 16.5" and ran into the same problem with avalibility of tires....
Ah, the choke problems. I have personaly had both electric and hot-air choke systems. The hot air choke works great when adjusted properly. Also...
Your source is correct, shim it. Shims are used on door hinges, body parts, ect to make a true alignment. My profession is a carpenter and I have...
Good thoughts there MarkyB. Tire size does affect final drive ratio. This is why many off-roaders that have 40"+ tires have to run a high 4.xx to...
Thank you 80chevybeater. This helps the start of my long journey in tracing back the roots of the Bonanza. 79 C20 Bonanza 350/400 4bbl Q-Jet...
One word... Sponsors. That is where Jegs gets a lot of advertising money. Both are good sources. :-) 79 C20 Bonanza 350/400 4bbl Q-Jet 3.73...
RE: What's the truth about exhaust I feel that I agree. I have stock manifolds with 2" downpipes welded to 2.5" pipes and mufflers (dynomax super...
RE: 75 gas tank (dont want to blow After a recall on these trucks, a non-metallic "skid-plate" was installed on the bottom of the tanks. I have...
I have a 79 C20 with 3.73 and factory tach. I run 3000 at 65mph and 3500 a little shy of 80mph, 4000 at about 90. I have put the tach to the peg...
Let me tickle your gray matter... What is the Bonanza package? I know they are rare, be cause I cannot find any information on them. I know that...
Ah, the pulse wipers... Do not do it! Just buy a delay box from J.C. Whitney or someone else. The GM pulse wipers are a headache. I have them on...
RE: 1980 c10 good brakes but will n I agree with MarkyB. Fluid seepage will cause grabby brakes as will a proportioning valve malfunction....
RE: tranny help which do i have and I almost forgot. A TH350 has a squarish pan with an angled corner, A TH400 has an illregular pan shape, and...
RE: tranny help which do i have and At about 100k I was pulling an empty horse trailer up a hill and the engine reved like I had kicked it into...
I am glad to see that I am not the only one that has a creative mind. I have a good deal of automotive experince, though limited on transmissions....
Separate names with a comma.
