mine is a 50. but ok, I have not tried it that way yet. I thought you could push the thing forward with the door open and then get out and...
mine is the type with the outside handles that rotate, not the button type. But when I push the inside handle forward to the lock position it...
what's the deal with the door locking. If I push the inside door handle forward I thought that was supposed to lock it. All that happens is when...
it won't bolt up to that tranny, plus it would probably vaporize it anyhow. you need a new one
RE: tailgate reflector P/N just got back from vacation. Thanks for the info, I'll check the truck shops
you can see the openings for it on either side of the lettering. Attachments: https://talk.classicparts.com/images/attachments/4350ea2f067801e7.jpg
my tailgate has two openings for reflectors on it. I think they are about 3" diameter, maybe 4". Does anyone have this tailgate also and know...
RE: Vacuum Advance TEST why not use the manifold vacuum rather than ported. If he uses ported he'll have no vacuum advance at idle, that's when...
110 pounds isn't that much for a main cap. Those are the caps that hold the crank in place. The crank comes out there, so the rear main needs a...
why don't you just take the bleeder screws out of the drums and take them down to the store. then you can just pick up the same thing. every...
RE: Helping Out The steele rubber site (and catalog for that matter) are both set up very poorly. They are confusing and tough to use. your...
I have a 9" in back with a 3.89 My 5th gear is a .64 though, so it will be acceptable at highway speeds with 28" rear tires. 2000rpm's gives...
I checked that page out. There is a long article that discusses hood alignment, but most of the solutions involve the types of hood hinges that...
well I did remove them, I removed every part of the truck. Yeah, there are 2 inside the cab and one outside. I had them all loose last night...
RE: 216 / 235 Safe rpm farts travel up your SPIN. . .or your SPINE?
just put my hood on this weekend and the action of the hood works perfectly, but when it is shut the gap with the body tapers increasingly towards...
It wasn't easy, but compared to installing the corner window glass it was a pleasure. I even had a helper for those things. I have no idea how...
The front piece was definitely the harder of the two. The rear one will stay put once you get the back strip screwed in, then you can at least...
I did this single handed and it wasn't that bad. I first just held up the back half and started screwing the rear metal strip in place. Then I...
RE: How to install the windshield e These windshields were brilliantly designed for maximum frustration during installation. You need to seat...
Separate names with a comma.