I too have a 64 chev pu and put both front and rear sway bars on. I droped the front end 2 1/2 inches with Early Classic drop spindels and used 1...
If you want to look at how I installed PS and where I mounted my accessories check out my web page. I updated my 64 with a 350 and PS/PB using...
>This is what I have. I have a 1960 Chevrolet Pickup 1/2 >ton. I have a 350 small block with a 3 spd transmission and >hydrualic clutch. I...
Hi Shawn, I replaced my gages with AutoMeter and they meet all my needs. I also included a clock. The dash insert can be purchased from several...
I have a 64 1/2 ton, which now has power disc brakes on the front. But when I was evaluating the different suppliers I found Early Classics...
I also used pop rivits to attach the weather striping to the sheetmetal. I recommend drilling the rubber as well as the sheet metal and using a...
I was faced with the same delema when re doing my 64. I decided to replace all of the wiring with new harnesses with some minor exceptions. One,...
You got me Dennis! That is the only major thing I have not complteted. I ran ebrake cables from the read drums to approximates were the clevis...
I have a 64 and the stock interior was the same color as yours. I thought it looked more gold!
I used a 70's vintage cross menmber for my setup. I put a 350 with a 700r4 in my 64 and the fit was just right. The front motor mounts fit the...
I assume you want the tank removed from the cab to the rear of the truck under the bed. You can check my web page, I have some pictures of what I...
Yes, you can easily exchange your 3.73 ring and gears with a 3.08 gear set. The setup requires precision adjustments so you may want a rear end...
I removed my gas tank to the under side of my bed and am happy with the results. (safer too) I used a pre made tank from No Limit Engineering...
You’re post is a little confusing because you don’t need to change the steering column if you are interested in just adding power steering. The...
My 64 had the stock seat that bolted directly to the floorboards. If your seat is blocked up it probably isn't the stock seat or the seat frame...
Upgrading to disc brakes is a great safety feature for these trucks. Also, power steering is an upgrade that modernizes your truck and is a...
I used Eastwoods Corollis on the bottom of my cab then used a top coat for the finish. Went on well and seems to be holding up well. Check out...
I replaced all my gages in my 64 PU and like the look. They are autometer gages and were easy to install and wire. I also re chromed my stock...
In my 64 PU the jack was mounted under the seat and a long spring was used to capture it in the stowed position. I don't use it anymore, partly...
I would avoid cutting the coil springs. There are a couple of ways you can achieve the same thing without cutting your coils. First, you can buy...
Separate names with a comma.
