Part 1
I have a 12v ez wiring harness going to the new double socket tailights from Classic. The harness has a park, turn, back up line. The new tailight has a black and green wire coming from it.
Is this how the connection should be made?
Taillight Green to park,turn (Harness)
Taillight Black to rev (Harness)
Add rev switch to 4-speed with rev line (harness)
Ground wire from lamp assem to frame
Part 2
I have also wired the headlights and new double socket parking/turn lights. I have both high and low beam headlamps but no park lights. I grounded to the fender well, Need to verify, but probably needs to go to the frame?
Wired as follows:
parklight black-brown park (harness)
parklight green-LT blue Left/Blue Right (harness)
I have a 12v ez wiring harness going to the new double socket tailights from Classic. The harness has a park, turn, back up line. The new tailight has a black and green wire coming from it.
Is this how the connection should be made?
Taillight Green to park,turn (Harness)
Taillight Black to rev (Harness)
Add rev switch to 4-speed with rev line (harness)
Ground wire from lamp assem to frame
Part 2
I have also wired the headlights and new double socket parking/turn lights. I have both high and low beam headlamps but no park lights. I grounded to the fender well, Need to verify, but probably needs to go to the frame?
Wired as follows:
parklight black-brown park (harness)
parklight green-LT blue Left/Blue Right (harness)