New Profile Posts

  1. Pappy France
    Pappy France
    Hello, I am looking for a template to cut the dish in the fender for the spare tire. 1954 Chevy 6 lug tires.
  2. Tims53
    Tims53
    Can anyone tell me what oil pressure reading at the dash I should get from my 1953 (216) Chevy pickup it hits 30 as soon as I raise the revs
  3. Mystic48
    Mystic48
    Usually available
  4. 56 Chevy 4400 truck
    56 Chevy 4400 truck
    Looking for help with tow capacity information for the 1956 Chevy 4400 truck with the 261 job Master straight six with a Rochester 1b carb?
  5. Bill Hanlon
    Bill Hanlon Morgan
    dual range HydraMatics are different and require specialized tools than ANY newer generation automatic trannys. There are probably 5 shops in the US that can overhaul one. Last I heard, there was one in southern California.

    I would recommend moving further questions on your truck onto a different forum.
    https://oldgmctrucks.infopop.cc/eve?csra=Y&s=272004236
    1. Morgan
      Morgan
      Appreciate the help Bill! I’ll stumble over to that other forum and see what I can kick up.
      Feb 12, 2023
  6. Arizona Jack
    Arizona Jack
    Tucson Arizona
  7. waldoze
    waldoze coilover
    I need an SM420 yoke.....1953 model 1/2 ton......I'm in East Texas
    thanks
    paul
  8. Lloyd Norton
    Lloyd Norton
    Do the glove box liner fastener clips install on the inside or the outside of the liner?
  9. Roger Sjolstad
    Roger Sjolstad coilover
    Hello from Norway. I was told that you maybe is the one to contact:
    I need one "Parking Brake Lever Extension" driver side for my ´51 3600.

    Or

    How to convert to Bendix?

    Thanks in advance :-)
  10. John Rat Rod
    John Rat Rod
    1957 Truck 236 six cly 4 speed. Frame off starting build
  11. 53fivewindow
    53fivewindow Lakeroadster
    Hi Lakeroadster, I also would appreciate the 47-53 tailgate lettering CAD file. Like Edwin before me, I know it's an old post but would be grateful to receive it. My email is kdbkdb@embarqmail.com Thanks in advance for your help!
  12. Al’s 1950
    Al’s 1950
    Anyone know where I can get the decorative skirts on the seats for us 1950 3100
  13. rtruckthom
    rtruckthom
    how to wire 1953 chevy truck 12 volt push button on dash
  14. Bill Hanlon
    Bill Hanlon coilover
    Evan:

    Any chance you have a LONG wheelbase late 40 to mid 50 Chey or GMC truck enclosed driveline lying in your scrap pile. I know a guy that needs everything from behind the tranny to just before the torque tube.

    Thanks, Bill
  15. lonehorn57
    lonehorn57
    just an old rodder
  16. lonehorn57
    lonehorn57
    just an old rodder
  17. GLRnTX
    GLRnTX coilover
    Evan,
    I recently handed my ‘51 over to my oldest daughter in Coppell. I am downsizing, but wanted to keep it in the family. Are you available to help her dealing with a column linkage issue? She is willing to pay for your time. She has no mechanical abilities. Her husband has a little.
    Greg Riedel. I
    have not been on the forum in a while and forgot how to do a PM.
    1. vwnate1 likes this.
  18. Edwin
    Edwin Lakeroadster
    Hi Lakeroadster, im interested in getting the chevy 1947 - 1953 and 1955 -1957 Tailgate lettering CAD file. I know its an old post but if you still have it could send it to 20vrsi@gmail.com
    Thanks
  19. coilover
    coilover Bill Hanlon
    Bill,
    The truck is a Chevy. I posted some pics on the discussion site.
  20. brad lacombe
    brad lacombe
    New Guy here!Just picked up this 1957 chevrolet Napco 4x4.Have lots of questions.Its a Canadian built truck it says?.
    1. brad lacombe
      brad lacombe
      First it needs a floor front and up firewall a bit,Door steps hinge pockets door bottoms,Any advise my first resto.
      Jul 13, 2021