Picture from the rod that is connected to the carburetor

Hello,
I need a picture from the part where the rod is fixed that is connected to the carburetor.
I need this picture because I don't know how this part must be correct fixed that it works.
I mean this part: https://www.kripahle-online.de/unterricht/wp-content/uploads/2020/07/Vergaser-Wippe2.jpg
Ask
Wolfgang

 

Throttle linkage bellcrank .

I don't have any pictures, sorry .

 

Hello Nate, the problem is completed. I've checked how the bellcrank will work.
Wolfgang

 

hopefully some one here will post some pictures.....

 

I will post one in a few

 

I think this is what your needing a picture of.

 

Here’s a few I got online pic #3 is mine I’m thinking mine is not on the correct way

 

Hello, thank you for your pics.
The last pic from LaTroca52 is the position where I fix my bellcrank and it will work.
Wolfgang

 

Note that there are multiple bell crank designs, early one are made of cast iron .

One of La Trucka's images clearly shows the hole for the vertical rod is no longer round , this is the #1 cause of failure to return to proper idle speed....

It's a fairly simple thing to have it welded up and re drilled then hardened .

I used to find these throttle linkages at swap meets, the horizontal pickup one is slightly different shape than the passenger car one and is often incorrect .