1960 - 1963 Chevy Truck Parts for sale in MN

Hey Brian,I noticed in the one threads you trade stuff-I have 2 fender imblems from a 1966 c-20 they got chevy imblems at top 20 at bottom.Since I dont have a c-20 3/4 ton any longer thought I would see about trading with you for the (64-66 in dash ignition w/key)
you got in your list for $25.00.let me know if you would be willing to trade .I know reproduction c-10 chevy fender imblems run about $21.00 a piece.The two I have are c-20 emblems they are aleast that a piece.Thank You for your time. 283 man(Morton)

 

The tailgate is a NEW reproduction with "CHEVROLET" script. It has never been installed. It cost over $400 from LMC catalog.

I have two step bumpers. One is chrome. It is good for daily driver, but I would strip it and re-chrome it for a show quality vehicle. (Because of its weight and size, it would cost a small fortune to ship so it needs to be picked up at my shop.) I beleive this to be a dealer installed step bumper back in 1961.

I live in the Owatonna, MN area. Are you near-by?
Thanks,
Brian

 

283 man(Morton),

I have a couple sets of C20 fender emblems in my inventory now taken from parting out a couple vehicles already. I have not had anyone interested in them and I don't have a personal C20 to put them on. I do appreciate your offer.

Do you have any of the following original equipment for trade?
60-63 cab air vents with cable
60-63 Throttle Knob with the custom chrome
60-63 radio
64-66 radio
60-61 "CHEVROLET" script for the glove-box door
60-62 front or rear bumper brackets for either fleetside or stepside
60-61 front grille (or parts of) esp'ly chrome bezels, 61 grille center insert, etc
dual brake / clutch master cylinder in good usable condition
heater delete plates
dash heater control "levers"
linkage from foot pedal to carb
linkage from 3 speed column to transmission
CUSTOM steering wheel
any bed cross-members
"horseshoe" front motor mount bracket
V8 engine side motor mount tower/stands
radiator shroud
complete radiator overflow tank, basket, hoses etc
power steering pump that attaches to back of generator (more commonly found on 57 58 chevy cars etc)
or
how about the hood "CHEVROLET" script letters for a 67-68 (my son-in-law is going to start his 68 Chevy truck project this fall/winter and he may need other parts as well).


Thanks
Brian

 

I do have a 66 AM STOCK radio Id trade you, if your interested.

 

Its come out of the 1966 chevy 3/4 ton I dont have any longer.got the CHEVEROLET word on front of it.

 

Also got a stock 66 steering wheel out of the 3/4 truck the big ones that came out in them.

 

The A M radio is (delco) brand and the stock ones that they put in them back in 1966.

 

283 man(Morton),

I have one ignition taken from a 64-66 Chevy and one ignition taken from a 64-66 GMC.
(Ignition includes switch, lock cylinder, key, and may have the electrical connector clipped from harness)
I don't have them in front of me, but I think the Chevy & GMC electrical prones on the back were different, and I didn't label them so I'm not 100% which is which. Can you describe the prones or send me a picture so I get the correct one for you?

I will be leaving 6am tomorrow morning for a 3 day weekend. So will be delayed a little responding and shipping.

I will pass on the STOCK steering wheel (only need the CUSTOM).

I could use the 66 A M radio complete with knobs.

My address is
Brian R Johnson
417 E School St
Owatonna, MN 55060-3050

Thanks
Brian

 

Let me know Brain be glad to trade( A M DELCO radio) with you,like to trade for 64-66 in dash ignition w/key,thanks for chatting with me.

 

Thanks Brain for trading thats fine on delayed shipping,I will take a picture of my ingnition prones on back next week and send it to you on here so we can get the right one. I got to work all weekend so I ll get back with you next week some time. My address is Morton Pratt 2501 s.e. 3rd street Bentonville, Arkansas 72712( P.S.) A M RADIO HAS ALL KNOBS...

 

Morton, All sounds fine. Brian

 

back to the top

 

Sal, You have an email. Brian

 

I am looking for a manifold for a 6 cy motor for a 1961 apache 60 1 ton dump truck. My dad looked every where and is running into a brick wall. Can you help me?

 

tallcoolone,

Do you know what size 6 cyl engine you have? Is it okay for me to assume it is a 235?

Do you need the intake or exhaust manifold or both?

I may be able to help, but I need more info.

Thanks,
Brian

 

questions

1. the headlight bezels. are they different from the '63 model?

2. The fender..what year and which side?

 

rustbucket, I have send you a PM message. Currently I do not have any bezels for a 63. Thanks, Brian

 

61 CHEVROLET stainless steel grille INSERT $50

still have?

 

61 CHEVROLET stainless steel grille INSERT $50

YES, I have a nice one available.

Thanks,
Brian

 

Yes, I have 3 good driver side doors for the 60-63.