What is the appropriate transmission ?

[LORD]

Hi everyone

I have a GMC pickup truck model 1979
Details of the engine:
Seasoned 454 block 1 or 2 pc rear main seal

• Bored and honed with deck plate

• Mains have been aline honed

• Block as been decked .020

• Dura Bond bearing installed

• Brass freeze plug and oil galley kit installed


• Block painted with 3 coats of high temp ceramic engine paint customers choice of color

• New Eagle Cast Steel Crankshaft 4.00 Stroke

• New Eagle I-Beam Connecting Rods With ARP Bolts And Bushed Pins

• Keith Black Hypereutectic Coated Skit Pistons (10.2:1 Compression When Used With 118cc Head And Standard .041 Thick Head Gasket)

• Clevite P Series Rod And Main Bearing

• Hastings Cast Rings Hand Filed To Match Application

• The complete rotating assembly will be balanced

• Three piece true roller timing set

• Custom Ground Hydraulic Flat Tappet Performance Street Camshaft With A Muscle Car Chop

• (16) New High Rev Lifters (Anti-Pump up)

• Dart Cast Iron Cylinder Heads

• (8) Stainless steel 2.300 intake valves

• (8) Stainless steel 1.880 exhaust valves

• (16) High performance valve springs and retainers (to match camshaft)

• 7 / 16 screw in studs and hardened guide plates

• (16) Chrome Moly push rods

• (16) New Performance Long Slot Rocker Arms W/1.7 Ratio

• Engine Will Be Assembled With All Brand New Bolts

• High Volume Oil Pump And Screen

• Chrome Oil Pan

• Chrome Dip Stick And Tube

• Chrome Timing Cover

• Professional Products Performance Balancer

• Fel-Pro Performance Gaskets

• Professional Products performance balancer

• Edelbrock Performer RPM Or Air Gap Intake Manifold Customers Choice

• Chrome Thermostat Housing

• Edelbrock Carburetor W / Electric Choke (Upgrade To A Holley For $ 300)

• 14 "Chrome Air Cleaner

• MSD Pro Billet Distributor

• MSD 6AL Ignition Control Unit

• MSD Blaster II Coil And Bracket

• (8) AC Delco Spark Plugs

• Custom Fit Taylor 8mm Ignition Wires (Color Of Choice Black, Red, Blue, Yellow, Green, Orange No Extra Charge)

• High Flow Cast Iron Water Pump

• Chrome Valve Covers

• Chrome Breather

• Complete PCV Ventilation System

The price of this engine for a 10 thousand dollars

Note
I want a manual transmission

Finally

Don M

Thank you very much for your help in the problem of chassis
​

 

[2tons of fun]

all the info is absotultey useless....


what do you what to do with the truck?

do you want an o/d?
do you want a go fast?
do you want a work truck?

 

[LORD]

all the info is absotultey useless....


what do you what to do with the truck?

do you want an o/d?
do you want a go fast?
do you want a work truck?

Sorry
I'm not an expert in these matters

do you want an o/d?
I did not know what you mean

do you want a go fast?
yes

do you want a work truck?
yes

I think that the size and engine power-related

Must be commensurate

 

[2tons of fun]

Sorry
I'm not an expert in these matters

do you want an o/d?
I did not know what you mean

do you want a go fast?
yes

do you want a work truck?
yes

I think that the size and engine power-related

Must be commensurate

o/d- over drive?

then you are going to what something like a nv4500. low first gear, tough, overdrive. they are not gear slammers or quick shifters but they are renowned for strength and versatility.

 

[LORD]

Can you put a link to such transmission of this


Thanks

 

[2tons of fun]

Can you put a link to such transmission of this


Thanks

what kind of link?

 

[LORD]

Link to any manual transmission, you are nominating

 

[2tons of fun]

http://www.google.com/search?source...lz=1T4ACGW_enUS310US312&q=nv4500+transmission

 

[LORD]

Thanks 2tons of fun

 

[drabo]

The transmission needs to be sized to the horsepower of the motor.