lots of blasting experience So far I've done most of my blasting using a harbor freight purchased 110 lb capacity sand blaster. Use either grade...
Found the upper control arm bushings via help from 4JSAToo. Now looking for the metal lower control arm bushings. The old bushings threads are...
found them. Thanks!!! :D
Can replacement upper control arm bushings be found? The only way to replace them I've found so far is to buy them on the arm from our host for...
Yeah, I've WD'd the heck out of most of the parts, but that doesn't get rid of the rust. I've got most of the pieces freed up or off, I just need...
For derusting suspension parts (and wheel hubs, brakee, etc) what's the best approach? I'm wary to use acid as I don't want to cause acid...
I've had to get one for my pick-up. In Texas it's the only way to get it if you've lost the title...my truck did not come up as stolen, the guy...
You guys just use the original torsion bars? Mine were sagging almost as low as you guys set yours (before I deconstructed the truck:D) and I...
colettesbro, Ever run across any torsion bars for a '60? Mine were saggy (before I disassembled the truck) and I can't find anywhere to buy...
Yeah, figured the brakes would need booster/disc/something to stop the vehicle. Prior to dissassmebly of the truck that "Stump-pulling gear" as...
Steering Column for a '60 1/2 2wd??? I was a little hasty in removing mine and managed to damage the internal bearings. I was wondering if...
I have a 1960 Chevy w/ a 283 4-spd. I recently rebuilt the rear end as the bearing were beyond shot. I saw that there was a new ring gear set...
Separate names with a comma.
