You can also space the steering box off the frame to the outside. You can make spacers and then re drill the hole in the top of the frame. I...
nice find. There are still deals out there.
Because your jimmy was positive ground. Hope the coil is ok.
I threw one of those away also, with a power steering apparatus on it......
There is a guy at the spring and fall Charlotte Auto fair who has Kansas sheetmetal, he usually has 2 or 3 pairs of these fenders and a set or 2...
Or get the IC64 coil from Napa with the internal resistor and do away with the ceramic piece.
The resistor goes in line between the coil power source and the coil. The wire from the coil (-) goes to the trigger wire on the distributor....
I hate to tell you, but I hauled the front and rear from my 51 3/4 ton to the dump in perfect working order.....I couldn't give them away around here.
They are about the same place as the one on the driver's side holes in the cowl. Hold them up and you can see where they fit properly.
I think they will come out from behind the rubber, but I haven't taken one off yet with the vent window.
Go to NAPA and get an IC64 coil...it is 12v. and has an internal resistor.....get rid of the ceramic one on the firewall. Cleans up the wiring...
2 inches is a wee bit excessive. Read in the service manual, it shows how to tighten up the slop. I would read and post for you, but I am out of...
Here it is.....http://www.ad-engineering.com/
Yes, there is. I will try to find it.
Couldn't give the thing away. Hated to do it, but to the landfill the axle went. I had to throw away the 3/4 ton front and rear also. I hate to...
There is only one rivet in the joint at the top. Drill it out,Then they fold in enough to get them off of the channel they sit on.
Would you happen to have a set of stainless trim for the outside door window?
No resistor. Just run +12 to the 12v terminal, fire it up.
I need it shiny.
I really need the outside door window stainless for the 53. It is the only shiny stuff I'm missing. Anyone able to help me out?
Separate names with a comma.
