Congrats Bill. You forgot to brag about this on the phone Friday.
[IMG]
Stand on your head.
Black wire that Mr. Brubaker refers to is the meter's black lead. Thanks for the review Bill.
This has nothing to do with the gas gauge, but I was just curious. Does the ammeter work otherwise? Turn on the headlights with the engine off....
Need to start by understanding a few things Paul. 1. The picture above of the gauge faces shows zero oil pressure hinting that the engine is...
On Wed, Nov 21, 2018, 11:18 AM Bill Hanlon <bill_hanlon@comcast.net wrote: Your story at...
Zig needs to get his gas gauge working. They are stock (1950?) GMC gauges, which means they were designed to work on 6 volt positive ground...
Did a search and found that the sending unit wire should be nearest the "F" on the gauge while the power wire should be nearest the "E" on stock...
Always! Stock gauges? 6 volt or 12? Someone else on the forum needs to remind us which side of the gauge attaches to the sending unit wire.
What about it?
Even though our host's web page here Rear End Gears-3.38 Ratio-Classic Chevy Truck Parts says "Chevrolet only", I believe their 3.38 gears will...
Thank for the response Evan. You are right about the "blind spline". I was asking for an internet friend who was concerned about his '58 GMC....
'58 GMC half ton (or any 55.2-59 Chevy/GMC half ton), when the front wheels are "straight ahead" is the pitman arm vertical? Or is the drag link...
Usually pretty easy to fix, especially if you have a working volt/ohm meter. Do we need to have another "how to" session?
You must have missed the post Martinius. https://talk.classicparts.com/threads/new-truck-old-guy.18647/#post-90023
My GMC does the same with its Carter YF carb.. Try this and see what the results are. Get the engine well warmed up, pull the air cleaner off...
Good to know Evan. I think I have it under control. The vendor is working with me to get this resolved.
THANKS! That is close enough to mine to verify that mine is likely stock. The problem I'm having is that one of the on-line old Chevy parts...
No way you are supposed to use fake or copy plates IN TEXAS, but it probably won't make a lot of difference in Norway. Here is the specific line...
Separate names with a comma.
