Hello everyone. Can I get some information on frames. Are all 1947-1953/54 frames for 1/2 ton AD trucks the same with the exception of shock mounts opposed to lever action shocks? Thank you.
No ; The 1954.2 frame is different because the box is different . I no longer remember the details but a friend went through this on his 1954.2 thirty years ago . The good thing is : used frames abound and are cheap and HAVE NO V.I.N. so once you get a good one, before anything else have the V.I.N. you already have stamped or engraved into the left upper frame rail near the steering box, then measure it ($5 says it's bent), have it straightened then replace the loose cross member rivets then (and only then) have it de rusted / bead / sand / vapor blasted and so on ....
There were minor changes, I'm sure Evan or Joe will know better than I can remember . Give it a few days, they'll prolly respond .
Hey Guys. I'm new to this forum but I have a 1952 Chevy short bed frame for sale if you know anyone interested. Thanks
The basic frame is the same 47-53 and as Nate mentioned, a few tweaks were done during the seven year run. Shock mounts, spare tire brackets, maybe(?) the angle of the rear engine mount, and the rear cab mounts are a few that come to mind but you can definitely use a 53 frame under a 47 and visa-versa. Anyone that can tell a Phillips from a flat blade screwdriver can handle the differences.
RE : 'TELL THE DIFFERENCE " : Well duh ; The phillips screwdriver is the one that silently ruins the new upholstery when you leave it in your back pocket and take a test drive.....