What kind of oil for the rear axle

Discussion in '1947-1954' started by wokri, Aug 29, 2020.

  1. wokri

    wokri Member

    Joined:
    Jul 14, 2008
    Messages:
    325
    Location:
    Germany
  2. Bill Hanlon

    Bill Hanlon Member

    Joined:
    Jun 4, 2002
    Messages:
    2,723
    Location:
    Fredericksburg TX
    From your book: 1954 Chevrolet Truck Shop Manual

    Using modern lubes, I'd us one marked GL-4. That way you could also use it in the transmission. GL-5 is OK for the rear end, but not for use in your transmission which had brass/bronze parts.
     
  3. wokri

    wokri Member

    Joined:
    Jul 14, 2008
    Messages:
    325
    Location:
    Germany
    What kind of SAE oil have your oil?
     
  4. Bill Hanlon

    Bill Hanlon Member

    Joined:
    Jun 4, 2002
    Messages:
    2,723
    Location:
    Fredericksburg TX
    Start by reading this page which explains why you shouldn't use GL-5 in your gearbox: The difference between GL-4 and GL-5 explained - Rymax Lubricants


    Lubricants are much better today than in 1952 when these trucks were new. Specifications in 1952 called for "SAE 90 multipurpose gear lubricant" in the rear axle and transmission. A modern GL-4 lubricant rated at 80W-90 will do the job well.
     
  5. wokri

    wokri Member

    Joined:
    Jul 14, 2008
    Messages:
    325
    Location:
    Germany
    Ok, thank you.
     

Share This Page