hey boys i need sum help im redoing my interior so i need sum seats bucket 2 tone red black ne help. thaks for the time.1986 chevyk10
Working on a seat swap up here in Canada too for my 79 4x4. I been able to find out that the seats from a Talon or a 5L Mustang will fit without too much rebuilding. Haven't made the swap yet but will in the spring. Hope this helps. Steve
I have a 82 Sierra High. I want to pull my seat out for upgrading to a later model. I see the front to bolts but not the rear. Do I remove the front bolts and carpet to unbolt the rear or do I unbolt the front to slide the seat forward and out? Please advise Thank you, David Attachments: https://talk.classicparts.com/images/attachments/43d4b01b0938b29e.jpg
>do you know where i can find a bench seat for my 83 chevy >silverado Where are you located? I am working on swapping my bench seat for a pair of bucket seats from a Burb. My seat was repaired and reupholstered 3 years ago (black fabric), so its still in fairly good condition, although it has faded some.
>I have a 82 Sierra High. I want to pull my seat out for >upgrading to a later model. I see the front to bolts but not >the rear. Do I remove the front bolts and carpet to unbolt >the rear or do I unbolt the front to slide the seat forward >and out? > >Please advise >Thank you, David You should just be able to slide the seat foward to see the rear bolts. If you still dont see them, the '87 burb I got my bucket seats from had plastic covers over the rear bolts, but I don't know if reg. cab trucks got these.
>I have a 82 Sierra High. I want to pull my seat out for >upgrading to a later model. I see the front to bolts but not >the rear. Do I remove the front bolts and carpet to unbolt >the rear or do I unbolt the front to slide the seat forward >and out? > >Please advise >Thank you, David I was able to locate the two rear bolts by forcing the seat forward. Thanks guys and gals.
hey man' dont know how many responses you already have for your seats. But the rear bolt's are a pain cus yes you'll have to pull the carpet to get to the rear bolt and if you have dual gas tank's you'll have to get between those and the bottom of the cab. if the nut's bust loose (press welded into place) hope that helps Good Luck 73_79Chevy350
