Part 1 I have a 12v ez wiring harness going to the new double socket tailights from Classic. The harness has a park, turn, back up line. The new tailight has a black and green wire coming from it. Is this how the connection should be made? Taillight Green to park,turn (Harness) Taillight Black to rev (Harness) Add rev switch to 4-speed with rev line (harness) Ground wire from lamp assem to frame Part 2 I have also wired the headlights and new double socket parking/turn lights. I have both high and low beam headlamps but no park lights. I grounded to the fender well, Need to verify, but probably needs to go to the frame? Wired as follows: parklight black-brown park (harness) parklight green-LT blue Left/Blue Right (harness)