RE: Removing 454 & T400 together fr
'bout 28 inches was enough.
I am pulling the 454 & T400 out of my '78 Suburban. After 2 recent crashes it was totaled.
The engine & trans won't come out together because...
My son crashed my '78 Suburban. I found a good deal on an '88 [same body style].
Both have 454s.
The radiator in the '88 is shot. Thr radiator...
Try these guys for a headliner:
RE: rear end interchangeability '78
Disregard this post. The '78 was crashed last week.
You may wantr to post it on the 348-409 page.
Time to brag;
We ran a steel '55 Chevy sedan with...
Will a 5-bolt c-15 rear end from an '87 bolt into a '78 5-bolt c-15?
A 400 big block is simply a 396 bored .030" oversize from the factory. Stock diameter 400 pistons will fit a .030" over 396 block.
Check with these guys:
Damper Dudes, 6180 Parallel Rd, Anderson, CA 96007, 1-800-413-2673.
RE: Front clip interchangeability '
Anyone know what year GM changed the hood hinge springs from old style coil springs made from round wire to...
I need to replace hood & fenders on my '78 GMC Suburban.
I have a line on the front clip from an '81 Chevy pickup.
Anyone know if this is a...
RE: Fuel Cell - Gas Tank whats the
The ATL website says that a racing fuel cell is a crash-resistant non-exploding gas tank.
Camper Rear Stabilizer GM Delco P/N 994385- RARE
These stabilizers are invisible from outside of the truck. My intent was to reduce the...
Compare the size of the combustion chambers. If they are considerably smaller, the compression ratio might be too high for pump gas & a reasonable...
My friend's 1st series '55 was in the family for about 30 years.
It had a one-piece windshield.
I always assumed that the '54 & earlier had...
The headliner is drooping [about 3"] over the front seat of my '78 Sub.
It appears that the headliner is supported around the perimeter, plus...
Old model crew cab pickups must be very rare.
I have seen several old style Suburbans turned into "Airport Limos". This was done before we had...
>how much of a pain in the ass would it be to switch from the
>carburated 305 to a fuel injected 350? anyone ever do this
RE: Vac Advance Won't Clear Intake
>First off, Hello to everyone.
>Second, my problem. I have a '63 C-10 with a 350. Recently I
Separate names with a comma.