Jeeze,no replies . All I can tell you from old farm trucks is : find one of similar year with the same 10 bolt ring gear that has an automatic,...
I would very much like to change the ring & pinion gears in the rear end of my 1969 C20. I don't like the extremely low gears that are in it now....
Serkan: Your truck would have left the factory with 4.57:1 (maybe even 5.12:1) ratio rear gears. The easy way to solve your problem is to...
Understand Rich, I do understand. We will be going to another state where it is hilly terrain, so brake fade can be a consideration. That is why...
Information and measurements obtained so far: Front Danna 44 Closed Knuckle Springs over axle passenger side drop Low pinion 65.5...
axle is from 1960-68 front dana44 rear eaton ho52 and most parts are still available at napa, quad 4x4.com, brake shoes are 12x2
I bought a 1957 Chevy 3100 that was converted to a 4x4 a little while ago and have been having trouble identifying the axles. I have tried to do...
i just did the same thing to my 1950 3800. i used a ho52 or ho72 from a 70's blazer. craigslist 100$. left the axle in place just swapped the...
chassis are the same for the most part, the steel maybe a bit thicker. the trailing arms are plated in a 3/4 and not in a 1/2 you could get...
2wd suburbans (like my truck) came standard with the 4.57 geared HO52 and never got the 4.10 gear from the factory, unlike pickups and 4 wheel...
yeah....the 3/4 tons basically got heavier duty versions of the 1/2 ton parts....especailly at the rear. 1/2 ton rear springs are not rugged...
rear axle hey bill.. and co. i was just perusing this type thread on my TF truck and i hear the smaller trucks used whats typed a HO52 up...
Separate names with a comma.
