Search results

Ive tried selling this before for like $50 and came close to have a few buyers but all usually found something closer. Its been sitting packaged up in my garage for almost a year and it has to go so if you want it you can have it for free, just send a check for the shipping. I pulled it out...

power steering pump mounts for 216, 235 & 261 inline 6's UPDATED AD - 07/27/2016 2 bracket sets available for 216 and early 235 inline 6 Late 235 and 261 inline 6 with or without motor mount Both sets locate the power steering pump in the original location of the generator/alternator. The...

Up for sale is a bracket set (and power steering pump w/ pulley if wanted) to add power steering to a 216 or early 235 inline 6's. This set mounts a late model GM "canned ham" style power steering pump in the location of the generator and positions the alternator directly above it. It may be...

Looking for some pictures of customized 47-53 dashes. Not wanting to copy anyone's work, just want to see what everyone has done. Im not 100% sure on what I want to do, so far my plan is: weld up the holes for the radio and weld in a filler panel where the center speaker cover/grill and ash tray...

Front splash apron Rear most passenger side spring hanger bracket Hood center molding Shipped to 18660 Please contact me either by PM or email at [email protected]

I trying to identify the rear end in my 52 3/4 ton. I was very close to being able to drive it around the yard and went to bleed the brakes and the bleed screw snapped off (at least it made me think of spraying the other side with PB-Blaster). Since the truck had been sitting for 10 years I...

FINALLY after months and months of the front of my truck sitting on blocks, its back to keeping itself up. Just got my new wheels and tires mounted and installed. This after swapping out the 3/4 ton axle for a 1/2 ton, installing a power steering kit and a 5 lug disc brake kit. Then I decided to...

For sale are currently 3 fenders for a 47-53 Chevy pickup. I have a driver side fender in great condition, paint not so much, asking $100 plus shipping. Also have both rear fenders, in decent condition but the one has some rust through but is very repairable. Both fenders were stripped down to...

I had read a few threads and articles online about adding fuel injection to a non fuel injected vehicle and decided why not try it on my 54 235 thats in my 52 3/4 ton pickup. There are a few people on stovebolt.com that have done this, or are in the process of doing the conversion. There are a...

Up for sale is a Holley 4bbl 390cfm carburetor, model #4160. I had it on my 54 235 for a few months, used only to start and idle the engine every now and then, never was used other wise. Reason for selling is I'm switching to TBI fuel injection. Its closely jetted for the 235, stock jets and...

my other thread was getting old and id like to start with the finished product, well almost. Need to finish the belt tension adjusters and get two belts measured and installed. power steering pump mount(mounted in alternator/generator location...

Has anyone purchased the firewall mounted pedal assembly from classic performance products. I did. I ordered it from Classic Parts of America and just finally received it as it had to be drop shipped from the manufacture. I get it and as soon as I take it out I know something don't seem right...

I wasn't sure where I could put this but I figured it had to be announced. Anyway I got this emailed to me from Summit Racing Equipment Urgent Legislative Alert Dear Fellow Enthusiast, Last month, we sent you an Urgent Legislative Alert from The Specialty Equipment Market Association...

I am in the process of designing and testing some bracket kits to mount a power steering pump to these older GM inline 6's (216, 235, 261) and have the 216 and early 235 done but I don't have access to a later 235 or 261 and need some measurements so I can finish the design for the later...

Thought Id share some pictures of the power steering bracket I designed and just welded together today. This bracket will mount a dodge (or GM) pump in the location of the generator/alternator, using the two bolts on the block. The alternator will be moved to the passenger side of the block via...

what is the difference between a 1941 thru 1950 front axle and a 1951 thru 1959 front axle? for the record there is a 5 lug disc brake kit for sale but it is for a 49-50 1/2 ton. The axle in my 52 3/4 ton is a 52 1/2 axle. Would the bearings be the only difference between the kits for 52-59? If...

Im planning on putting disc brakes on my 52 3/4 ton (with a 1/2 front axle) and figured Id see if anyone has/had the 5 lug disc brake conversion on their truck and is/will be swapping to IFS or back to stock before I buy a new kit from a retailler. All I really need is just the basic kit with...

Can anyone tell me what all is included in this kit. http://www.classicparts.com/1947-59-Disc-Brake-Conversion-Kit/productinfo/71-975/ It looks like from the picture that everything is included including the roller bearing conversion but Im not sure. The picture isn't exactly clear on what is...