Search results

anybody know what seats would fit a 65 C10 with built in shoulder harnesses?Can these be purchased ready made to fit the truck without taking up a lot of leg room? I have noticed some in cars but may be too thick. thanks, Bobby

Okay guys, I need help with how to stick my new capet down on top of the dynamat so it doesn't slip around. I am also having trouble getting my new kick panels with speakers to adhere. Any suggestions would be appreciated. thanks for all the help.

I am using a late 60s variable ratio power steering box on my 65 C10.i believe the gearbox goes all the way to the mid 70s. I can't remember what pump I have. any recommendations as to which pump would be the best fit to run the lines the neatest way?

hey guys, I ordered a set of kick panel covers with the speakers for my 65 c10 from Classic Parts. What is the best way to mount these to the original kick panels. I have some dynamat I want to put behind it and want to get the best sound. should I attach this to the new panel or the kick panel...

I am installing a Vintage air GenII in my 65 c10. it has a 350 small block from a 72 monte carlo.I want to move the alt. to the drivers side. what year small blocks had the alt. on the drivers side? It has a long water pump if that matters. thanks,Raking

has anyone installes a VintageAir heating/cooling system in a 65 C10? if so how do they compare with similar products and do you recommend any other brand of bolt on unit? raking

Here is a challenge to you guys. Years ago I took off my tailgate chains and smoothed the tailgate. I used GM seat belt buckles to hold the gate shut. I have not figured out a good way to support the gate in the down position. any pictures or suggetions would be appreciated. With your help I may...

hey, what's a reasonable price for getting a drive shaft balanced? Mine was shortened after putting in the 700r4 transmission but I don't think they balanced it. I now pick up a slight vibration at 65mph and up. thanks for the help. Bob

I am having a new ring gear and pinion put in my 65 C10. has anyone installed an Eato locker in one of these trucks? I just had the tranny changed out to a 700r4(very happy with the drop in rpms). it will cost an additional $500.00.to do this.Is it worth the effort and cost if you need...

has anyone just switched a 65-66 C10 over to the newer spade type fuse block without buying a complete wiring kit such as Painless wiring? I have upgraded several things on my truck and intend to do more such as electric windows and locks. I already have ac and back up lights added. Any...

In my 65 C10 I am running a mid 70's rear end. has anyone converted to rear disc? I would also like to have a more compact booster. Any recommendations? PS: I'VE TAKEN YOUR ALLS ADVICE AND AM PUTTING IN A 700R4 TRANNY.I CAN'T WAIT TO SEE THE DIFFERENCE IN FUEL ECONOMY. THANKS GUYS.

I have changed out front suspension on my 65 c10 with a 1975 suspension(about 15 years ago) it became very sloppy. I replaced the ball joints,drag linkand tie rod ends along with two rebuilt gear boxes(one from gm). The first gear box was very loose.the gm unit helped that but is still quickie...

I have a 1965 C10 swb truck. I would like better fuel economy from the 1972 350 with 350 turbo from a 1972 Monte Carlo(3.43 rear end). I have been exploring 700r4 trannys,aftermarket overdrives and 3.08 rear gears. any suggestions as the best way to go. the truck is used for cruising and not a...