Try calling Tom Myers 1-918-542-3871
Yes I would invest in a proportioning valve.
Call Alan Grove Components 1-913-837-4368
Hello!
The brown wire runs to the ignition resistor on the same side as where the wire runs to the ignition switch.
Welcome we have a great group of people here to help you out.
You could wrap the heaters or make a heat sheild for the starter. That is 2 cheaper ways to fix the problem.
I would check to see if there is a place where it might have a worn wire that could be touching or you can take out the sender and check it with a...
There should be a number located on the rear of the motor behind the distributor on the flange right before where the bellhousing bolts to the...
Your stop light switch is located on your brake lever, that's what activates the switch is the brake lever. If you have a fax number I can fax you...
RE: Need to find expert on 1966 ser What are the questions?
We don't carry a crossmember to put a V8 in one of those trucks, but I have heard that the V8 will set on the 6 cylinder perches but you will have...
RE: QUESTION: C14 convert to 4X4 (K You just need to remove 12" behind the cab out off the frame. A longbed is 127" and a shortbed is 115"wheelbase.
You can get a rearend out of a 60-70 Chevy truck and have the 6 lug pattern and bolt right up to the trailing arms. Pick an automatic truck and...
For the paint you might try www.autocolorlibrary.com they can email you a chart, just type in your year and make.
91 Blazers are the same as 86's so we carry allot of items for those and the strips you are refuring to are called Blazer to rear glass to...
Sweet!
Try Alan Grove Components 1-913-837-4368 They make some very nice brackets for those motors.
73 is the first year for those and they had the 4X4 emblems on them.
The identification numbers on the turbo 350's is on the right side of the transmission oil pan. The first 2 numbers will tell the year of the...
Separate names with a comma.
