I have the seat I removed from my '57 GMC a few years ago. I am about 30 miles north of Houston. If you are im the area you are welcome to it,...
Information about the two methods can be found at http://www.classicperform.com/power1.htm http://www.classicperform.com/power2.htm
If you are in a hurry and/or want to go low $$ get a set of mid/late 70's 4wd Chevy/GMC 15" wheels. That is what I have on my '57 GMC with disk...
In my case (GMC V8) the "hot" heater hose passes about 4 inches below one of the rods that run from firewall to radiator. I used a larger than...
I use an "in line" valve to control the water flow through my heater. I have the "heat" control of my 57 GMC deluxe heater control connected to...
Unfortunately the GMC Master Parts Book only lists whole frames as: Group 11.0010 Frame Note: Frame Assemblies must be ordered NPN giving...
RE: RE%3A Bolt Pattern change OK, I'm too dumb to figure out how to do an attachment. If you are interested contact me at...
RE%3A Bolt Pattern change Attached is a picture of the mid-70's 6 lug Chevy 4x4 (rally?) wheels I have on my 57 GMC. The knock offs were less...
5 lug front hubs from 53-54 Chevy car are a direct replacement for the stock 6 lug 1/2 ton truck hubs. I am not positive that the bolt cicle is...
Shaft comes out the bottom. Even when completely disassembled I did not see any way to remove the tube from the box. The Master Parts Book for...
Clocks were available as an option on 55-9 GMC trucks, but not Chevy trucks.
RE: How to remove hub from brake dr Those '3 permanent "knobs" that protrude through the drum' are actually large rivets. To remove the hub...
Separate names with a comma.
