http://www.partsamerica.com/ProductDetail.aspx?categorycode=3193A&mfrcode=MRL&mfrpartnumber=302311 Hope this helps.
Do yourself a favor and stick with the floor shift. Something is probably just loose. If you have to B&M sells a cheap floor shifter and Locar...
A Dana 44 or Dana 60 was used on Ford, Chevy, and Dodge. They're bomb proof and can be found in the junk yard. Also try calling Randy's and get...
CPP has what you need. I would reommend that you spend the extra bucks to get the disc brake spindles. Their brake set ups are based on I do...
Just my two cents. The yoke from a T350 also fits a 700R4.
I bought a new alternator from them. After a week a screw on the inside of the case came loose. Needless to say it made one hell of a racket and I...
I do beleive the bolt pattern is the same but the back spacing is not. You might need spacers to make it work.
Just buy a new bumper. You can sand down the chrome and then paint the bumper white. Use a rough grit like 80 to remove the chrome and them use a...
Thanks 283 man. There are alot of people out there that don't realize the sacrafice that military members and their famlies make for our country.
You can make a Ford better with a Chevy motor but you can't make a Chevy better with a Ford motor. Sell the motor and tranny and use the money to...
Check out American Racing. They make a chrome ralley rims. They look just like the 200.00 plus wheel vintique ralley but they are chrome instead...
Just ran into a snag on the motor rebuild. When ordering piston rings make sure you measure the third groove to see if it is short or deep. If you...
The tranny will bolt up to your motor. How ever it might not fit under the truck. Check to see if you have a tall hump or a short hump. Also check...
I have standard ralley caps from a Camaro on my wheels. There the same as your wheels except they are chrome. It looks like your going for that...
Yes the 400 is a good motor. Your problem is that it is already bored .060 over. I'm not positive on this but I think that might be the max bore...
www.bowtieoverdrives.com is a good source for automatic transmission questions, parts, ect. I would recommend that you keep the old radiator and...
Thanks 283 Man, It would be great to get together up here in AK. I'll be leaving here in two years. If you still have that side I'd love to...
I just checked. CPP's brake system is designed to fit 71-87 Chevy 1/2 tons. So you can use parts off your donor truck and parts from the parts...
Update Okay I've figured it out. I have a Gen I block with a one peice rear main seal. I was told that all 1 piece rear blocks were Gen II's....
I don't believe youcan get a drop-in for a 60-66. A 67-72 bed liner would probably fit. The problem with a drop-in is it speeds up the rotting...
Separate names with a comma.
