Of all the vendors I've been dealing with (our host,LMC,American Classic,Jim Carter,etc.)nobody has rear brake shoes- Huck type, for a '52 3/4 ton...
I'm missing one of the steering stops that attach at the tapered lock pin on the front spindles. Does anybody know if any of the vendors sell...
I'm putting a 235 in my '52. I'm going to use the 216 water pump with an adapter plate to keep the fan centered on the radiator. My question is,...
On huck brakes there are 5 pins that hold the shoes together. There's a center pivot pin that connect the two vee shaped bars together, then on...
Just acquired an air cleaner off a '53 1 1/2 or 2 ton and I was wondering if it is the same as what came on a 3/4 ton? Also, I'm guessing the cage...
Does anyone know how to remove the ignition lock cylinder from the switch if you don't have a key to turn it to line up the little hole with the...
I noticed today as I was working on my engine,( I'm re-gasketing it,pan, rear main, freeze plugs, etc.), that the 1st lifter is a solid lifter the...
I'm replacing all the freeze plugs while I have the engine out & the flywheel off. I am wondering what is the recommended way of installing them...
On my recently acquired 235 a PO removed the front guide pin for the exhaust manifold & tapped the hole & installed a bolt, this was not done to...
I found a '60 235, trying to get it running. Timing is right, points & plugs are cleaned & gapped, threw a new condenser in, gave it a shot of...
I'm seeing 2 types of head gaskets for the 235, one is a fiber-faced gasket, the other is a copper-faced sandwiched gasket. Is one better than...
I've got 4 generators. 2 have Delco-Remy tags with only model & ser. #'s, the other 2 are part store remans. with no tags at all, none of them...
Happy New Year to all, Besides the shop manual, does any one have a good detailed link on the disassembly/ assembly of the sm420 transmission?...
Can anybody tell me what year these trucks went from 6 volt to 12 volt? Also, what year they went from generators to alternators?
Does any one know how to convert a 216 to full pressure oiling & insert type bearings? Or have a link to this info? Would it even be worth while...
Does any one know how to convert a 216 to full pressure oiling & insert type rod bearings? Or have a link to this information? Is it even...
On the tranny of my '52 3600,the bearing retainer at the input shaft does not have the sleeve on it that the T.O. bearing rides on. It has just...
Hello all, I'm new to all this, not real computer savvy, so please bear with me. I have a '52 3600, have had it over 25 years. Decided it was time...
Separate names with a comma.
