4 speed trans
4 speed trans 1948 1/2 ton how much?
Need a 4 speed trans for 1948 1/2 ton.
tires rims are those bias tires ?how much for set of 4?
i think it will only rase it 2 1/2 inches .Some one told me the narrow 4 rims will not matter on non steering tires, the guy who wants to sell me...
tires up front 215/70/15 tires in back 235/75/15 on original 4 by 15 rims ,is that ok?
if i rase my back end 2 1/2 inches with taller tires,on my 1948 1/2 ton.Would that affect oil presser on my second series 235 engine ? thank
I want maximum speed on 1948 1/2 ton, what is the tallest radial rear tires that will fit? I have original rims. I have 215/70 /15 in the front....
I now have 215/70/15 if i increased my rear tire size to 255/70/15,with 3.55 Ring Pinion on my 1948 1/2 ton, at normal high way RPM i now go about...
I have 1948 1/2 ton original 3 speed on the colum,torque tube.I whant to put a 4 speed in.The 4 speed trans i have is GM 580 474, the i got it...
Rochester 1958 carb rebuilt last summer ran fine, ran fine this summer.Got on high way for 50 miles drove fine at difrent speeds,got off high way...
Torque tube 1/2 ton.What is the best way to get enough clearance betwean trans and tourque tube.To remove the Ball coller ,whith out removing...
I am swapping 4.11 for 3.55 ring and pinion on 1948 1/2 ton.I need some shim help the original shims where .033 any idea where to start the new...
picture of lock nut
I will check with Dead zone i might buy his 3.55 ring pinion or Patrics.On a nother web sight they referd me to a ebay they have the lock nut...
Torque tube 1948 1/2 ton.Pinion lock nut is broke at lock clip so i can not lock it into the slot.Any ideas were to get one, is this a...
Oil drain plug leaks, threds look and fill good.Oil heats up it drips evon more.Any quick fixes. thanks
what is my best option, lowest cost this 1/2 ton 235 is at best average.first swap 4.11 to 3.50 ring and pinion, bring the tube and rearend to...
thanks for all the help truble shotting the leak ,only ran whith full choke and ran bad.those who said carb ,main jet needs cleaning where right...
can i get asemblely diagram for 216 rochester on line and where.thanks
Separate names with a comma.
