I have a 2wd reg cab longbed frame under mine. If memory serves me correctly, the zr2 has longer control arms and slightly wider track width up...
Well I was in the neighborhood and thought I'd stop by... happy new year! Much has happened since my last visit, unfortunately the 53 is in the...
If you are happy with your current springs, you can keep them. The joy of the dropped spindle is the ride and (most) geometry don't change. I say...
That almost looks like my 71 did My 71 "G" did the same thing. When I pushed the clutch in, the whole front of the cab would lift up. It had...
I don't know if I overlooked something, but :confused: According to Ohm's law, without using a voltage reducer you will be pulling half the amps...
If you want to hide them in plain sight you can alway mount a spotlight on the A pillars.
Aomeone with a manual please chime in I know on the newer and thinner inlines (250) one (or both) of the front headbolts was slightly less torque...
A REAL hardware store preferably Not a big boxer if you can help it. :D A small diameter punch will take it out easy peasy
That frame and inner fender hide a lot But from the view I see in the picture, it looks like a drip from the above general direction. can also...
Welcome Ray! Nice start there! You have found a wealth of knowledge here. One question that comes to mind for me... are you planning an S-10...
Not sure about satin, or low gloss, but... How about some tractor paint. It is available at your local farm supply store. Van Sickle makes a...
Don"t do it!! Just my opinion LOL. ;) Many years ago I had enough of the comulmn shift hanging on my 71. and went with a Mr. Gasket floor kit for...
Awww Heck Who says you gotta have a truck to hang around? I havent seen mine since the move to the new crib - almost 2 years!?? :eek: I think I...
Looking good Looks like things are progressing.
I always cringe at the thought of cutting the coils. Yes, it gets the desired results (stance), but at a price (diminished handling and...
As far as why the top was off... Could have been the previous owner couldn't get the shifter out when tearing down their truck. I know that was...
My friend the upholsterer uses Contact Cement. Uses a spray gun to apply it, but it can be brushed on if so desired (or required) the newer low...
Not sure... My 71 was a 3 speed... My 04 blazer with 4l60e requires moving the crossmember to get to a couple pan bolts. Same with a 95 vandura.
I fabricated a lift and dolly for mine It was prolly overkill, but it served the purpose of both lifting and moving the cab for my 53, blus the...
If I remember correctly... The HEI from the old Iron Duke 153 may also be an option for the newer inlines - at least on the 250. just user a 6...
Separate names with a comma.
