Thanks for this though I'm kinda the other way around - stock tach / after market ignition. If yours worked with a resistor, maybe I need the...
Anyone have experience with a Tachometer Filter? I have a stock tacho in my ’69 C10, but the po installed a 350 with a HEI unit so it just...
Thanks Big Tim, good tip. Next time I'm doing this I'll put the dizzy in while I can still turn the engine by hand - or do it when the pan's off...
I had the same problem. When I fitted a new distributor and a new oil pump the two were such a tight fit it took me about an hour of turning...
And I thought my rebuild was just about complete... now there's that one extra I really have to have.
If you have any pedal pressure but nothing happens at the brake cylinders then you have a blockage in the line somewhere. Getting dirt in there...
She's already proud. Every Friday evening she stands on the White Cliffs and stares out over the English Channel with her arms folded and her...
You can get the two hoses from CP, they're part 84-151. And, for the hook up itself, take a look at the thread 'Cannister Oil Filter Hookup'...
Aggie? OK, I give in, what's an Aggie?
Graphite it is then. And thanks for the garbage bag advice Nate, I can never do anything, even just taking the lid off the can, without getting...
I've done this myself with similar results, though not as large an underspeed as yours. And, I still only have vague figures anyway, I mean...
Fantastic looking truck you have there Greg - great job. I know what you mean about the rear sill bed bolts...
After two significant occasions when I found myself in the position of pushing on the brake as hard as I could and still not being able to push...
Almost the same I have pretty much the same at the back of my 55 1st, this is the best photo I can easily find of it. You can't see too well...
Well, the oil filler plug (the screw in the cover of the differential) in my truck is towards the bottom rather than the top, though mine is a 55...
At Aust
At Aust with the Old Bridge in the background
Truck show at Calne
At the local truck show, Yate
Hey Nate - good story in Vintage Truck. That's just the right place to get the message across to lots of people who run these trucks with no...
Separate names with a comma.
