Before I did my disc swap I split my lines and used a master cylinder off of a 67 Impala . It was an easy swap . You need to undo the rear...
hi still have it ?
Man its been a while since I posted . Here are a couple of pics of my truck as it sits. [ATTACH] [ATTACH]
sorry but 60-62 control arms are not compatible with any thing but 60-62. You would need to swap out the whole cross member. As far as your hub...
here is mine a 250 with Clifford intake, headers and some shinny stuff. [ATTACH]
Installed the master cylinder and have been cruising all week ! [ATTACH] [ATTACH]
were are you located? any pics?
Yup, you have to "center " the valve use one of these: http://www.performanceonline.com/Combination-Proportioning-Valve-Bleed-Tool/
I got it with the 5 lug axle swapped in its a 3.73 I changed it for a few reasons. The main reason was that mine was cracked. Plus I wanted...
As many of you know life sometime gets in the way of working on our trucks. About 5 years ago I got a rear end off of a 67 c10.Well Monday it...
Try pouring a small amount of a product called " Sea Foam " into the carb and let it sit for about 30 mins. Then see if it starts Here in...
I woundr if you may have a dirty carb ? That ethonal gas is garbage! Try sqiurting a SMALL amount of starting fluid into the carb and give it a try.
Man mine did the same thing last night !!! My 60 has a 250 with clifford /2bbl 350 cfm holley and a pertronix. Yurned out the MSD blaster 2 coil...
I plan on using a hydroboos off of an Arostar van. Here is a pic of it with th pushrod cut off . I was going to run the little 8" one in the back...
Did you sell them ?
pld post , but do you still have the carb?
Looks nice !! what size rims/tires are you running
thanks guys here is two more [ATTACH] [ATTACH]
great looking truck, makes me miss my bbw
Thanks . Yea I decided to do an outline instead of painting them. It was a bit harder then I expected
Separate names with a comma.