Since I upgraded my truck to 12V and installed a self regulated alternator, I decided to make a modern small blade fuse box. I used an old voltage...
Quaker Oil API SL I have been reading about this deal of the newer oils that have no zinc on them. In one of the places that I read they...
Guys, You have no idea how excited I am tonight, after almost 7 years working on my truck I was finally able to start the engine on my truck...
You are right (Always?) Yes, you are right the radiator is not the standard radiator, it is thicker at the core. I understand that you are...
The radiator is thicker I just found that my radiator is thicker (other dimmensions width and heigth are ok) and it could be a Desert Cooler...
I think I have a desert cooler radiator I think the clearance problems that I have are because the radiator that I have is a deset cooler and it...
Electric fan? I was thinking about the electric fan idea. What kind of electric fan did you used? What kind of donor vehicle would be the best...
Yes, the fan is the original fan, but... Yes, but the main problem is the water pump shaft seems to be too long and I bought a short shaft water...
Hello, So here is my dilema. I have a 53 Chevy truck that I have been building for quite a few years now. Finally I am ready to get it on the...
It has been a while since I posted a question, so here is my question of the day. I converted my '53 truck to 12V with alternator, I got the...
Lap belts I installed lap belts in my truck, I installed a separate anchor plate for each belt and for each side of the belts. I can't remember...
Here is a photo, the circle points to the boss and the thread on the two holes. In the donor car the tranny was mounted on some sort of...
I posted this one on the Classic Parts section of this forum, but I have not gotten any responses. You would think they monitor the forum,...
I installed a 4 speed saginaw tranmission in my 1953 Chevy truck. The transmision has a boss at the bottom of the tailshaft that looks like it was...
My truck currently has the stock original single master cylinder system. I had the original MC re-sleeved with brass by an outfit in California. I...
Found problem I took both front drums off and checked the bearings and found no problems, checked the drums for warping or out of round, fine....
Some pics... Here are some pictures, the "before" pictures that I have are not digital and will have to be scanned. I have more pics, but forum...
I was checking the bearings in my truck today because I noticed when testing the brakes that the wheels would wobble some when hitting the brakes....
Hello Fellow truck lovers, Just joined this forum, I have a few questions, but first I would like to introduce myself and my truck. I got my...
Separate names with a comma.
