thinner rubber It was just a fluke finding thinner rubber. Some of the reproduction mfg quality is not so hot so things are made slightly bigger...
late model is a little wider Correct me if I am wrong here: The late model front suspension and rear axle are a little wider than the stock...
messy It's a mess but it works. I buy the big tubes of construction adhesive. Tube it on then smear it around with rubber gloves. You have to...
Dads I'm glad to hear your that tight with your Dad. I can visit with mine for about 15 min before I start pulling my hair out. (Wait a minute, I...
I have the deck material in my truck I am installed the poly deck 5/4 material in my truck bed. I have a '62 short step. If you are not making a...
try a late model mustang I am sure there are many that will work fine. I was just doing some painting on a 05 Mustang. The mast screws off. The...
You gotta trim Mine didn't quite fit like I thought they should. I had to do a bit of trimming. I just put a couple of screws through them into...
No other labor included The $150 may cover the items listed but it won't include disassembly or reassembly of the rest of the motor. If you...
I have no affiliation with the truck or seller. I have not personally looked at the vehicle. The photos look good on craigslist. I saw this add...
Drill little holes in the rubber The V notch is to let the air out of the rubber which has a continuous channel in it. Using the V notch method...
This site is mostly dedicated to the pickups with an occasional larger truck. The step van is a little off base. I am unfamiliar with the early...
Blast then epoxy prime Blast with your preference of media (fly ash from a power plant is my preference for heavy metal, for sheet metal I hire a...
economical paint gun Check out this web site. http://purplesagetradingpost.com/sumner/techinfo/HVLPspraygun.html Harbor Freight sells an...
$5500 is more like it I can't see how this suspension was modified to this state for $500. have you priced air bags, compressors, custom A...
check the wiring termination These wiring harnesses are built on wiring tables. The guys building them go pretty fast. Their mind isn't always on...
add door switches The wiring you guys talked about is standard on all vehicles through at least the 80's. The light always has its power. The...
My setup I have a Thrift heater and am using the Deluxe controls. It works fine there is just one extra control arm that isn't used. I used the...
Already did that. I have already adjusted the strikers all the way out. There isn't enough movement available. I think the front of my doors...
Then I need more rubber I just put the cab door seals on mine. I didn't look much at the catalog to see what else is available. My doors...
Your trucks look good. Here's mine. We must be thinking along the same lines. Mine is a '62. These are the first outside photos from this...
Separate names with a comma.