after much blood, sweat, and prayers found the problem. dont know what its called but there was a small brass plug not much bigger than a tylenol...
tim i agree thats what it sounds like to me or maybe vacuuml but i have started the truck sprayed carb cleaner all around base of carb, the intake...
ok i have done a very intense cleaning and rebuild of my carb. 250 inline single barrel. truck still will not run without the choke on, even...
took carb off this evening ran some small wire through the vac ports and the jet cleaned real good with carb cleaner, made a minor adjustment to...
as far as i know they came with the amber lenses. I have a 66 c10 and thats what it has on it. You may want to search some of the threads on...
Don i am running the idle mix screw about 1-1 1/2 turns from closed. last night i checked intake and all hoses, carb base etc. for vacuum leaks...
now gone from confused to just plain frustrated. Done a complete rebuild on the carb put it back on yesterday still same problem. It will run with...
ok did some trouble shooting this weekend problem is that carb is not getting enough fuel. when the fuel line is disconnected at the carb. the...
thought it just cold weather, but has been in 50's here for last couple days still having carb troubles. when sitting still with choke on will run...
back to carb. troubles again. was running fine till a few days ago i had to put a new clutch kit in. it sat for 2 days without running while i...
66 c10 250 i6. did have an old muncie 318 tranny. swapped it out for a saginaw 3 speed. after swap, throw-out bearing went bad so i put in a new...
Mark, Leyland thanks for all the info. i am talking about hwy miles and the engine is a 250 6cyl. i do have some minor issues with getting the...
I have 66 c10, had a muncie 318 3 speed transmission (w/out overdrive) in it. Had some troubles and changed to a saginaw 3 speed without any...
thanks for all the info, i pulled the tranny last night and removed side cover. the 2nd-3rd shift fork was sheared off on one side. everything...
Mark, turned out the growling sound was a very worn carrier bearing. pulled driveshaft and fixed that over the weekend, now however the kicking...
thanks for the info, i am leaning toward a bad u-joint or wheel bearing myself. one other thing a couple days ago before the noise started, the...
66 c10, 3 speed on column. suddenly developed a growling sound while driving. seems to be worse at slow speeds 5-25 mph. above that it seems to...
found it turns out the noise wound up being a small leak in the exhaust manifold gasket. like to have drove me crazy trying to find it. thank...
also is it possible that it could be something with the points gap or ignition timing that would cause the noise. i know that plug wires can...
Separate names with a comma.
