1960 - 1963 Chevy Truck Parts for sale in MN

Discussion in '1960-1966' started by colettesbro, Jul 2, 2007.

  1. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    Please let me know if you want/need anything from my list and I will save it for you.


    **** *Partial PARTS LIST* ****
    **** * OEM unless noted * ****

    (*IF YOU DON"T SEE IT LISTED HERE, please ask. My inventory is constantly changing.)

    Front Fender (sandblasted, repaired(if necessary) and primed) $115
    Front Fender (as is removed from vehicle) $75
    Inner Fender (sandblasted, repaired(if necessary) and primed) $95
    Inner Fender (as is removed from vehicle) $50
    60-66 inner fender - a single reproduction never installed (drivers side) $75

    Front Grille Support $65-90

    Hoods prices vary by condition

    60-63 DOORs prices vary by condition
    64-66 DOORs average condition $45 each or $80 for the pair

    62-66 Complete SHORT BED TRUCK SET of side molding. Very Nice condition. $150.

    60-66 SHORT BED FLEETSIDE side panels -left & right side available. not perfect but very very GOOD. $200 each.
    60-66 FLEETSIDE front panel. not perfect but very very GOOD. $50.
    58-66 FLEETSIDE Tailgate condition is usable $50
    58-66 FLEETSIDE Tailgate condition sandblasted, repaired(if necessary) and primed $150
    58-66 FLEETSIDE Tailgate conditon near new/mint $250
    60-66 FLEETSIDE inner wheel tubs $30-60 each


    60-63 Dash Instrument Cluster (All needle gauges type)$50
    60-63 Dash Instrument Cluster (CUSTOM CAB Chrome idiot light type)$50
    60-63 Dash Instrument Cluster (idiot light type)$40
    60-63 Dash Instrument Cluster ( speedo needle broken) $25
    64-66 Dash Instrument Cluster $30

    60-63 Custom Deluxe windshield SS Chrome Trim $125
    60-61 Custom Deluxe windshield SS Chrome Trim WIDE $150
    60-63 CUSTOM Deluxe Cab side/pillar Trim SS Chrome VERY NICE $85
    64-66 CUSTOM Deluxe Cab side/pillar Trim SS Chrome NICE $55
    60-63 CUSTOM Deluxe Steering Wheel NICE $125
    60-63 STEERING WHEEL used standard truck OEM $35

    Steering Columns prices vary by type and condition

    Bench seat prices vary by condition

    60-66 Chrome wiper arms $20 pair

    61-61 "Apache 10" hood side Emblem $15 each or $25 Pair

    60-63 RADIO used OEM from 61 Chevy $25
    60-63 RADIO used OEM from 62 GMC $25
    60-63 Radio DELETE PANEL $10
    60-63 Cigerette LIGHTER metal round DELETE PANEL/PLUG $10
    60-63 HEATER firewall DELETE PANEL SET $75

    60-66 Keyed-alike Lock SET (Ignition, 1 door locks, Glovebox lock) $40
    60-66 Keyed-alike Lock SET (Ignition, 2 door locks, Glovebox lock) $60

    60-66 steering wheel center Horn Button $5 each
    60-66 front & rear bumper -painted and chromed available $25-50
    60-66 2 rear fleetside step bumpers $25 each

    60-63 Driver or Passenger Door $50-110
    60-63 Glove Box door $15
    60-63 Glove Box door WITH CHEVROLET SCRIPT $75

    60-63 Heater Box Deluxe Model (engine side of firewall) $50
    60-66 Heater Box (mounts inside cab side of firewall) $55
    60-63 in-dash heater controls unit $25
    60-66 heater directional vent unit $25

    60-63 Door Checks $25 pair
    60-66 Hood Hinges and springs $30 pair
    60-63 side cowl pieces $15 each
    60-63 Cowl air intake valance $25

    60-66 Rear small window Glass original OEM $30
    60-66 Rear LARGE window Glass original OEM $40
    60-63 Windshield glass $150
    60-63 Windshield rubber gasket $20

    60-61 RARE HOOD V8 EMBLEM $150
    60-66 Front Shocks pair $15
    60-66 Sunvisor Brackets pair $20

    60-62 Automatic Transmission CrossMember (Extremely RARE) $250

    60-66 GMC a headlight bezel $20
    60-61 Chevy headlight bezels hard to find - painted type choice $35 each
    60-61 Chevy headlight bezels hard to find - CHROME type choice $55 each

    60-64 interior (stainless steel/chrome) rearview mirror bracket & day/night mirror hard to find $45
    60-71 interior (stainless steel/chrome) rearview mirror bracket $15

    60-66 tailgate custom hidden latches NEW pair $120
    60-66 hood latch $15 each
    60-66 hood latch receivers (mounts on radiator/grille support $10 each

    60-66 radiator upper hold down brace/bracket (powdercoated silver) $35

    60-66 in-dash headlight switch $10
    60-63 in-dash wiper switch $10
    60-63 in-dash trottle/choke knob pulls $10 pair
    60-63 in-dash ignition w/key $25
    64-66 in-dash ignition w/key $25
    60-63 CUSTOM CAB radio knobs chrome accent set $25

    55-66 set of NOS new old stock AC Delco spark plugs 6 cyl 235 CID $10
    55-66 NEW Points/Extremo Contacts 235 CID $5
    ? - ? NEW Bosch 13" wiper blades (Premium) $7
    60-61 NOS new old stock Front Wheel HUB $65
    60-66 NEW drum brake PADS $25
    60-66 Battery Tray (sandblasted but not painted) $15
    60-63 door latches $30 pair
    64-66 Door latch (driver door) $15
    60-63 door striker plates $20 pair

    60-66 manual tranny Clutch pedal arm assembly $10

    60 painted grille $130+
    61 painted grille $130+

    61 Chrome grille $160+
    62 Chrome grille (actually I think its SS or Aluminum) NICE $200


    60-63 door interior metal panels NICE $25/pair
    60-63 door Wing/Vent window assembly -includes glass, vent handles, rail/channel, etc $30 pair
    60-63 door/side window w/metal frame $20 pair
    60-63 door window regulator (inside the door) $10

    60-66 used OEM in cab cardboard gas tank cover $5
    60-66 Fleetside (tailgate) top rail edge cover - chrome diamond plate $20

    60 in hood turn signal blinker bezels hard to find nice pair $60
    61 in hood turn signal blinker bezels hard to find nice pair $65
    62-66 in hood front park light Chrome bezels $10 pair
    61 CHEVROLET stainless steel grille INSERT $75
    60-66 V8 motor mount "stands/towers" from a 62 hard to find $60
    __________________
     
    Last edited: Feb 26, 2009
  2. jchav62

    jchav62 Member

    Joined:
    Feb 5, 2007
    Messages:
    23
    Location:
    Santa Fe, NM
    Are you willing to ship some of these? I'm interested in the side trim, 60-63 custom cab pillar trim. Also, do you have pics of that 62 grille? I'm in New Mexico. Thanks...
     
  3. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    link to quick photos taken

    Yes, I will ship parts to New Mexico.
    The only limitation is when the size and weight too large for reasonable shipping costs.
    Side trim, custom cab trim, grilles, etc are not a problem.
    Things like hoods, 235 engines, etc get expensive.

    Brian

    Here is a link showing some of the parts you asked about.

    http://www.imagestation.com/album/pictures.html?id=2093120956
     
    Last edited: Jul 2, 2007
  4. OlCurt

    OlCurt Member

    Joined:
    Dec 8, 2006
    Messages:
    79
    Parts

    I sent you a PM
     
  5. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    OlCurt,

    Yes, I have 4 wheel tubs. A very very NICE pair from same truck and a lesser quality pair from another truck. I have sent you a PM. Brian
     
  6. sleepysal

    sleepysal Member

    Joined:
    Oct 16, 2006
    Messages:
    87
    I have delt with Brian ( colettesbro) on a few items , I have had nothing but good dealings with him , Fair, fast and friendly service. Thanks for helping me out.
     
  7. OlCurt

    OlCurt Member

    Joined:
    Dec 8, 2006
    Messages:
    79
    Sal,

    Thanks for the advice. I'm getting a few parts from Brian. I've been following your progress.......I'm jealous!!
     
  8. OlCurt

    OlCurt Member

    Joined:
    Dec 8, 2006
    Messages:
    79
    Fleetside step bumper

    Crap, I need to quit looking at your list! :eek: I also need a Rear bumper for a 66 Fleetside. Can you tell me what you have there?

    Thanks
     
    Last edited: Jul 4, 2007
  9. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    I have two step rear bumper for the fleetside @ $25 each. However they are very heavy and would cost a fortune to ship. So they are not economical unless picked up at my location.

    I do have a factory standard CHROME rear bumper for fleetside. It is very nice. $75. (I think repo chrome bumpers like this are around $125, so this may or may not be economical vs repo one.)

    I would like to sell you a bumper, but I also want you to know shipping costs or repo costs are considerations as well. Trying to look out for you so there are no surprises later.

    Brian
     
    Last edited: Jul 4, 2007
  10. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    Sal, I am saving LOCK SET for you. Thanks, Brian
     
  11. zeitlerusmc

    zeitlerusmc Member

    Joined:
    Mar 25, 2007
    Messages:
    41
    Location:
    Camp Pendleton, ca
    Wow that guy has alot of nice stuff!
     
  12. zeitlerusmc

    zeitlerusmc Member

    Joined:
    Mar 25, 2007
    Messages:
    41
    Location:
    Camp Pendleton, ca
    What about a auto crossmember and a driveshaft for an auto shortbed truck?
     
  13. Cams

    Cams Member

    Joined:
    Jul 14, 2007
    Messages:
    3
    In need of parts/information

    Brian - I recently purchased a 1960 Chevy extra long box (9 foot plus) step side. I know that many of the parts you have listed above will fit, so if I decide to do a restoration myself I will probably be contacting you for parts. This '60 is pretty bombed out.

    My main question to you is, do you know of anyplace I can find information on this "extra long" style of pickup? FYI the VIN is 0C364J106592. I'm very interested in restoring this truck, but need help deciding whether to do my verson of a restoration, or have someone do a groun up restore on it.

    I currently own a restored '65 Chevy long box, step that I did. (Not the greatest job, but road worthly)

    Thanks for any information you can lend.

    Bob
     
  14. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email

    zeitlerusmc,

    I do have a crossmember from a 1961. This is for the "x" frame sytle frame. This automatic crossmember is rare because it was used only for a couple of years. Not knowing what year truck you have I am not sure if this is what you need.

    At present this is the only automatic crossmember I have. Because it is difficult to find and no reproductions available, I have it in my inventory. If you have a later year, they are available thru most parts suppliers.

    I do have one driveshaft from a 1966 Chevy shortbed if that will work for you.

    Thank you for your interest in my 60-66 truck parts. It is very appreciated!

    Brian
     
  15. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    Bob,

    I do understand that a 9 foot bed is less common than the others. So I would assume some side parts (such as the steps) would be rare and probably difficult to find. I am not an expert on the 9 foot bed, so my comments would be an opinion. I would suggest that you start a new thread asking the forum group for their thoughts on this. You will probably get some more experts in this area with their thoughts.


    Brian
     
  16. zeitlerusmc

    zeitlerusmc Member

    Joined:
    Mar 25, 2007
    Messages:
    41
    Location:
    Camp Pendleton, ca
    I have a 63 !
     
  17. Jesse_27

    Jesse_27 Member

    Joined:
    Jul 6, 2007
    Messages:
    2
    How's It Going

    Hi!! My Name's Is Jesse And I Have A 1961 Chevy Apache. I Just Wanted To Ask How Long Did It Take You To Fully Restore Your Truck? And If You Can Give Me Some Pointer's On How To Restore Mine. :d
     
  18. Cams

    Cams Member

    Joined:
    Jul 14, 2007
    Messages:
    3
    Thanks Brian.

    Believe it, or not, but the step and grill are in, almost, perfect shape. It's the rest of the truck that is bombed out. lol

    Comparing the '60, with my "65 it appears most all the parts are the same, so I think finding good replacement parts will not be quit as difficult as I first thought. Hopefully, down the road, I will be contacting you for some parts. Right now, I'm just happy it made the 60 mile treck from Butte.

    Thanks for your comments,

    Bob
     
  19. colettesbro

    colettesbro Member

    Joined:
    Dec 4, 2006
    Messages:
    209
    Location:
    Owatonna, MN contact info: cell 507.456.3625 email
    bttt
    thanks
     
  20. svaz65chevy

    svaz65chevy Member

    Joined:
    Aug 24, 2007
    Messages:
    1
    Parts for '65 chevy pu

    I am interested in several of the parts you have listed.
    (1) 60-66 fleetside tailgate, near new/mint condition $250. Is it embossed with Chevrolet?
    (2) 60-66 rear fleetside step bumper $25. Is it chrome and what is the condition?

    Tnks for your time, please reply soonest.
     

Share This Page