-
We have upgraded our forum software! See here for details.
inner firewall cover
- Thread starter rem48
- Start date
hkypooh
Member
You could probley make splits in the cover and work it around the various parts, but to install it the correct way you would need to remove the heater and the fuse box.
dvalentine
Charter Member
>You could probley make splits in the cover and work it
>around the various parts, but to install it the correct way
>you would need to remove the heater and the fuse box.
This is correct. It isn't very difficult to remove them. The heater box is just a few machine screws and one small bolt. ( in addition to the wire harness and cable ).
The fuse panel dosn't need to be completly removed, just removed from the firewall.
DV
>around the various parts, but to install it the correct way
>you would need to remove the heater and the fuse box.
This is correct. It isn't very difficult to remove them. The heater box is just a few machine screws and one small bolt. ( in addition to the wire harness and cable ).
The fuse panel dosn't need to be completly removed, just removed from the firewall.
DV
tranny swap
i put a 69 camaro three speed behind a 350 in a 61 1/2 ton and have not drove the truck yet, my question is whether this combination is good , bad , or just ok . i took out the original four speed cause it was trashed, im positive the rear is 4:11 .
i put a 69 camaro three speed behind a 350 in a 61 1/2 ton and have not drove the truck yet, my question is whether this combination is good , bad , or just ok . i took out the original four speed cause it was trashed, im positive the rear is 4:11 .