Passenger Side firewall fender mounts

[jayz63]

Hello everybody. So in the process of replacing the floorboards in my 53 truck, I don't remember if there were bolts that ran through the toe board for the passenger side fender well mounts. As I'm getting ready to put the front clip back on I noticed there are holes in the fender well to be bolted to the firewall or a brace, but there are no holes in the new floorboard. Does anybody recall a brace on the firewall passenger side like there is on the drivers side for the Ebrake? Thanks again a head of time. The part I replaced was 45-912 and another part that shows the holes is 45-915.

 

[Tubby]

No brace on the passenger side

Inner fender bolts up with a piece of anti squeak gasket between.

Not my picture
http://www.pbase.com/dennygraham/image/117185133/original

 

[jayz63]

Yeah thanks for the info. I guess the new floor boards have no pre-punched holes and will have to be drilled out.