The bearings that were installed in the drums on my 3/4 C-20 are not the correct ones, at least the outer ones arent. Anyone have the part numbers that are on the bearings themselves. Had ALL this info and when I thought I was done I threw all this info away including the old bearings themselves. What is happening is that the snap ring inside the drum is not containing the outer bearing in its race. I can't even go 50 yards and the whole thing starts coming unglued. HELP!!!
A question that should be obvious BUT, the snap ring that is in the hub SHOULD hold both the bearing AND the race correct? I mean, it is called the "bearing retainer ring".
