replacement seating

[fyritup52]

Can anyone tell me what other seats will fit in my 52 1/2 ton.I'd like to maybe put buckets in after I change fuel tank to under truck bed.......thanks

 

[herman quail]

I chose to use fox body mustang seats. I had to make a small base for each seat. Then I was able to buy new foam and will recover with leather.
steve

 

[51oleblue]

I used the seats from a Lincoln Mark 5 . Perfect width split bench with center arm rest 6 way power driver side. Just welded a piece of angle iron across back and fabed front riders

 

[ccharr]

Lincoln seat was what the guy i bought my truck from stated he put in it.

 

[51John]

I used a seat from a 1994 Silverado fits great cut the seat pan out the 94 seat sits on it's own feet the back of the seat is about 3 to 4 inches thick was able to leave my gas tank in place. have plenty of room from that big ole steering wheel

 

[Zig]

I used a seat from a 1994 Silverado fits great cut the seat pan out the 94 seat sits on it's own feet the back of the seat is about 3 to 4 inches thick was able to leave my gas tank in place. have plenty of room from that big ole steering wheel

Do you have pictures posted somewhere of this?
Thanks!

 

[ccharr]

Quote:
Originally Posted by 51John
I used a seat from a 1994 Silverado fits great cut the seat pan out the 94 seat sits on it's own feet the back of the seat is about 3 to 4 inches thick was able to leave my gas tank in place. have plenty of room from that big ole steering wheel

Do you have pictures posted somewhere of this?
Thanks!

Looking at ??? . .. www.chevrolet.com/Silverado .. .... thinking about putting a Silverado seat in are you, the change over can be painless as seen below.

 

[indybowtie]

Third row bench out of a Astro van...fits perfect

 

[Root2812]

I have bucket seats out of a 1964 Impala SS in my truck. They actually fit pretty good and since they don't have head rests they don't block the corner windows.