1953 3100 parts

Discussion in 'Truck Parts for Sale' started by 52wasp, Mar 28, 2018.

  1. 52wasp

    52wasp Member

    Joined:
    Jul 21, 2006
    Messages:
    674
    Location:
    Wilton, New Hampshire
    Hello all,
    I have the following parts available, which may help out another ADer with their truck project:

    frame
    front axle
    rear end
    216 #1 (that was partially dismantled when I got the truck)
    216 #2 that ran (although it had a knock) when I bought the truck
    3-speed trans
    1 set of seat springs, bare metal (had them chemically stripped when I dipped the body)
    1 set of seat springs, stripped of upholstery
    at least 4 decent 16" wheels
    assorted front and rear brake parts
    1 driver-side door (darn near rust free- from out west)

    Everything is located in Southern NH. Open to reasonable offers. PM me here for more info. Thanks!
    Mike
     
  2. 50 Chevy LS3

    50 Chevy LS3 Member

    Joined:
    Jan 14, 2013
    Messages:
    951
    Location:
    Indiana
    Hi, Mike.
    Hope everything is going well.
    Cleaning out the corners in the shop? I have several parts, I guess I should list, also.
    You might want to save a rust-free, western door. They are getting harder to find in good shape. If you were my neighbor, I would be interested.
    I already have doors for three trucks, though.
    Steve
     
  3. 52wasp

    52wasp Member

    Joined:
    Jul 21, 2006
    Messages:
    674
    Location:
    Wilton, New Hampshire
    Just bumping this back up a bit... the key words are reasonable offers. I am hoping a nearby fellow AD-er might have a use for a part or two.
    Thanks!
    Mike
     
  4. RidesWithYah

    RidesWithYah Member

    Joined:
    Jan 10, 2011
    Messages:
    309
    Location:
    Lexington KY
    Hi Mike, I might be interested in that door - see my post in the forum trying to understand the differences among the years.
    I have a '51. The '52 door is set up for vent windows, push button handles?
     
  5. 52wasp

    52wasp Member

    Joined:
    Jul 21, 2006
    Messages:
    674
    Location:
    Wilton, New Hampshire
    Hello all, just bumping this ad again.
    I'll be moving sometime fall of 2020 (it's just around the corner), and I'd like to see these parts go to a good home.

    All parts from a North Carolina truck unless otherwise specified:
    frame (3100, 6-1/2' bed)
    rear end
    at least 4 decent 16" wheels

    Currently stored indoors:
    front axle and leaf springs, rear leaf springs
    216 #1 (that was partially dismantled when I got the truck)
    216 #2 that ran (although it had a knock) when I bought the truck
    carb, air cleaner, manifolds
    3-speed trans with linkages
    1 set of seat springs, bare metal (had them chemically stripped when I dipped the body)
    1 set of seat springs, stripped of upholstery
    assorted front and rear brake parts
    1 driver-side door (darn near rust free- from out west)
    1 LH rear fender with tire well and bracket, 1 RH rear fender. Both bare metal- no surprises

    Everything is located in Southern NH. Open to reasonable offers. PM me here for more info. Thanks!
    Mike
     
  6. RidesWithYah

    RidesWithYah Member

    Joined:
    Jan 10, 2011
    Messages:
    309
    Location:
    Lexington KY
  7. 52wasp

    52wasp Member

    Joined:
    Jul 21, 2006
    Messages:
    674
    Location:
    Wilton, New Hampshire
    Edited 6/15/2022.
    I have sold, given away and scrapped most of what I had.

    Here is what I have left:

    a pair of 16" 6-lug wheels. Valve stem holes are opened up a bit. May still be OK for tubes.

    Currently stored indoors:

    1 set of seat springs
    assorted brake parts
    1 driver-side door (darn near rust free- from out west)
    1 original left rear fender with tire well and spare tire bracket. Bare metal. No surprises.
    1 original right rear fender. Bare metal. No surprises.

    Everything is located in Southern NH. Open to reasonable offers. PM me here for more info or pictures. Thanks!
    Mike
     
    Last edited: Jun 15, 2022
  8. KYGEARHEAD

    KYGEARHEAD Member

    Joined:
    Jun 6, 2022
    Messages:
    15
    Location:
    Fancy Farm, KY
    Will the rear brake assembly fit a '49 3100. If so would you be willing to sell it separately? I've got a friend who is in need of the 4 connecting links and hardware for the drivers side rear brake. Were in far Western Ky.
     
  9. 52wasp

    52wasp Member

    Joined:
    Jul 21, 2006
    Messages:
    674
    Location:
    Wilton, New Hampshire
    Good morning _____ (you didn't give a name),
    The brake parts you seek are for Huck brakes (per Nate's comment- he knows his AD truck stuff). The parts I have are for Bendix brakes. Not interchangeable.
    Sorry I can't help.
    Mike
     
  10. KYGEARHEAD

    KYGEARHEAD Member

    Joined:
    Jun 6, 2022
    Messages:
    15
    Location:
    Fancy Farm, KY
    My name is Tim. I'm from Fancy Farm, Kentucky. My best friend has a 49 Chevy 3100 and has been looking for these parts for 2-3 months with no luck.
     

Share This Page