Newport Engineering makes one that is suppose to work with the stock choke cable. It's not the bracket that causes the problem but the motor...
Got a different number for it, that number shows steel brake line. I'm interested in getting a roll. Thanks
Not the best pic but it might help. [IMG]
Try Greyhound bus company.
I got a real nice 3 speed out of a 51 1/2 ton. 300.00 plus shipping. [IMG] [IMG] [IMG] [IMG]
Find a rivet that is in the same spot on both sides of the frame towards the front, then measure in an X pattern to see if the rear end is sitting...
I did a search on SS bolts and came up with this. Do a goggle on F593C stainless bolts and you'll come up with a lot of info on those bolts. ....
Grade 5 or 8 will work fine, most stainless bolts are a low grade (lower than grade 5) that work good for things like putting your box together,...
I doubt if they could tell you just how much your truck has been dropped from stock. With Eaton if you want the nylon sliders you need to tell...
The grinding had to be done on the opposite end of the shackle and it was about an 1/8". I like the Eatons better than the Posies because of the...
I can show you both Posies and Eatons. Both are quality springs and come with the bushings in the eyes. Eatons first...they are raw steel and...
Honestly I can't tell you if a 3 inch drop would put you at the same height as the picture your showing, now my opinion would be no it wouldn't. I...
Eaton has the ones that can be bought in different heights, and yes heat and springs don't go together. Eatons site even says that if your welding...
I wouldn't trust my life on those springs even if they were bent properly which I doubt there were, no competent spring shop would let something...
or wait till winter and use it for a sled. I'm surprised you got a refund on it, they must have had problems with others and don't want the...
Separate names with a comma.
