The first CHMSL?
The Griz is the cartoon mascot at my "home" ski resort. I have only heard that kind of hat referred to as Coon Skin (coon as in racoon). Davey...
I thought I made a mistake once, but I was wrong.
I took a piece out of each frame rail (and shortened the drive shaft) to suit the fore/aft wheelbase. The donor truck was about 18" too long,...
The point about it not being gearing was that the increment from 30 to 40 is the same as the increment from 50 to 60. The error would be...
The thread is 5/16" UNF. Once the rod is through the holes with the friction washer as shown in ol chebby's photo, it gets another friction...
Window channel retainers This is something that has also been bothering me. The originals on my '52 had little metal tabs with teeth that were...
Still in pieces and I have never posted a photo of it. Pesky day job interferes, plus I spend all my free time in winter on skiis. Drivetrain...
I could use one of these to keep my truck warm!
I put a pusher in mine as well due to lack of clearance. I don't have any pictures handy, but it fit easily between the diagonal braces and the...
Ken had it right. There is one that is held on to the lip below the windlacing your picture showed. The seal is L shaped with a metal strip and...
Armoured iginition wires I had a '59 Volvo that had armoured cable between the ignition switch and coil as well.
You must be referring to the Chevrolet.
Don't use it to clean concrete unless you also want to coat the concrete with something later. It dissolves concrete readily and is used to etch...
Separate names with a comma.
