mine is a 50. but ok, I have not tried it that way yet. I thought you could push the thing forward with the door open and then get out and...
mine is the type with the outside handles that rotate, not the button type. But when I push the inside handle forward to the lock position it...
what's the deal with the door locking. If I push the inside door handle forward I thought that was supposed to lock it. All that happens is when...
it won't bolt up to that tranny, plus it would probably vaporize it anyhow. you need a new one
RE: tailgate reflector P/N just got back from vacation. Thanks for the info, I'll check the truck shops
you can see the openings for it on either side of the lettering. Attachments: https://talk.classicparts.com/images/attachments/4350ea2f067801e7.jpg
my tailgate has two openings for reflectors on it. I think they are about 3" diameter, maybe 4". Does anyone have this tailgate also and know...
RE: Vacuum Advance TEST why not use the manifold vacuum rather than ported. If he uses ported he'll have no vacuum advance at idle, that's when...
110 pounds isn't that much for a main cap. Those are the caps that hold the crank in place. The crank comes out there, so the rear main needs a...
why don't you just take the bleeder screws out of the drums and take them down to the store. then you can just pick up the same thing. every...
RE: Helping Out The steele rubber site (and catalog for that matter) are both set up very poorly. They are confusing and tough to use. your...
I have a 9" in back with a 3.89 My 5th gear is a .64 though, so it will be acceptable at highway speeds with 28" rear tires. 2000rpm's gives...
I checked that page out. There is a long article that discusses hood alignment, but most of the solutions involve the types of hood hinges that...
Separate names with a comma.
