Sorry to hear that. How bad was the fender damage?
You wire them in as close and directly to the battery as you can, and they allow the lights to draw power directly from the battery. That reduces...
Yep, that's a SPDT (single pole, double throw) relay, so it will have the 87 and 87a terminals that you need.
I have seen a few generic/aftermarket relays that are designed for power locks/windows, but the generic 4/5 pin relays can't do what the door lock...
Power door lock relay, similar to this:...
Nope, only one door lock relay. Either switch will activate it, and it triggers both locks. The windows don't have relays from the factory.
The switches activate the lock actuators through the relay. The grey and tan wires in the door harness run to the actuators, if you can touch...
I know there are some a/c delete panels you can buy, but they can be pretty pricy: http://www.acdelete.com/pages/73-90_Truck.htm You could...
Do you have the complete wiring harness to go with the doors? If you can get your hands on extra connectors for the window motor and lock...
Looks like LMC sells the '83-'87 idler support bracket (34-1161) for $50, would probably be fairly easy to go to a junkyard or find someone...
Sounds like it is either a vacuum leak, or the throttle position sensor. Has it thrown any codes? Idle on your truck is controlled by the...
There should be some dimples on the cab and doors midway between the door hinges, these are either for the bolt holes for the accordion looms or...
Well, I'm think he'd be willing to part with it (the truck is long gone). The question would be cost of shipping, as they'd probably charge extra...
My brother has a repo 2 pc fan shroud for his old '78 C20 w/350 sitting around here. Radiator side opening is 16.75" x 28", fan side is ~21.5"...
6.2s are about as powerful as a stock 70s/80s 350. Unlike a Cummins or a newer diesel they were designed for fuel economy, not power. First...
1. Before pulling the column apart further, I would check to make sure the ignition rod is moving with the ignition cylinder. If you pull the two...
Did it start before you replaced the switch? The tumbler is the ignition cylinder, where you put the key in. Its operates the ignition switch...
If it has the Chevy V8 bellhousing pattern, it will. Wiki says 1963 and later I6s should.
Yes, the 700r4 uses the same V8 engine bolt pattern as the th350 and th400. Forgot to mention the 700r4 also uses a throttle valve cable to...
th400 (turbo 400) - 3 speed auto - typically used behind high hp/torque motors th700r4 - 4 speed/overdrive auto - light duty, but better highway...
Separate names with a comma.
