I remember reading that it was how to determine the 292 from the other straight sixes. The 292 has offset mounts because it uses one V8 mount and...
May have hit my first snag since installing these: My driver's side window stopped going up all the way and sounded like the motor was jumping...
Classic Parts sells wiring diagrams for $5-10 for complete trucks by year, although looking through the one I bought for my truck, I don't see...
Unfortunately longbed stepsides are pretty rare for this bodystyle, but you might get lucky if you look around craigslist, ebay, or car-part.com.
Did this just start happening or has it been doing it since you've had the truck? I'd think one of two things have happened: 1. The brake...
Could be that a resistor on the back of the gauge has gone bad: link
The '73-80 fenders will fit but you will need to swap the core support, hood, and shorter wiper mounts as well. I have heard of people having...
On the truck you should have: Lt Green - Reverse Brown - Taillights/Side markers Yellow - Brake/Left Signal Green - Brake/Right Signal
I did went from manual to power about 6 years ago and they've been pretty reliable since I swapped in the new regulators, just slow. My pass side...
If you have access to a digital caliper (auto parts store loan-a-tool maybe?) that would be the most accurate way to measure them, and you can...
Guess I should have mentioned for those that want to try this these are standard Bosch 5 pin/30amp Relays, these are the ones I used. You are...
I read about this upgrade on ck5.com about 2 years ago and finally got around to trying it this week. I've tried just about everything else:...
8 lug (8 on 6.5") - any 3/4 or 1 ton pickup wheels except for '97 and newer Fords should fit. 6 lug (6 on 5.5") - 6 lug GM and at least some...
I'm pretty sure both the 10b and 12b rears from K10s are 64" wms to wms. Maybe they were refering to the Chevy Luv? That truck was replaced by...
The only way to know for certain would be to pull the cover and check. You can estimate the ratio by jacking up one rear tire, put the truck in...
Assuming they are both original they should both be 12 bolt rears and should have no problems swapping them. Any axle from '73-87/'91 1/2 ton...
The linkage on my '85 is below the cowl, underneath a black plastic screen. There is a space behind the top of the firewall for the linkage.
As Nate said, it's recommended to at least replace the accumulator/dryer, while you have it open I would also suggest replacing the orafice tube...
I got lucky and found a spare power steering pump at Pick-n-Pull to rebuild back around Thanksgiving off my perfect parts truck ('85 C20...
Has anyone here rebuilt their power steering pump? I'm wondering how hard this is and if there are any tricks I should know before I take mine...
Separate names with a comma.
