There should be beauty rings available. Not sure what types of custom hub caps are available for 6 lug, but hubcaps from any '73-'86 k10 or...
I haven't ordered any steering parts from here, so I can't say anything about the parts they sell; but when I replaced all the steering components...
http://brochures.slosh.com/
Ah, my '85 didn't come with one, but I went ahead and put it in when I installed the diesel wiring harnesses. Mine doesn't appear to work either...
The wire coming from the gauge cluster is a ground iirc. On my truck the other end of that ended up on top of the ash tray assembly. The...
You can buy a used factory tach cluster, check ebay. Bare minimum you will need the tach, fuel gauge, and printed circuit. I added a stock...
Have you checked to make sure nothing is hitting? If that's not your problem, I'd check to make sure the steering box is centered. Make sure the...
1/2 and 3/4 ton frames are the same, 1 tons are different. As long as both are 4x4 they will just bolt up, might need a conversion u-joint (Napa...
My parents bought a new Trailblazer (I6, 2wd LS) in '04. It has been pretty dependable for 5 years now. Biggest concern has been a whirring...
Looks like Classic Parts also sells them, but you would pay as much in shipping as the part....
If you're talking about a crate 350, you may want to talk to a smog referee about what you can do. I'd think for a new block you just need the...
On my 4.3 and my 6.2 the oil pressure sending unit was located up at the back of the intake by the driver's side head. Parts store should have...
Vibration while in park does sound like motor mounts, when my the mounts in my dad's '85 Olds went bad the motor would rotate 1 - 2" when...
When I pulled my 4.3L/700R4, I pulled the front clip (fenders, hood, core support) off as one piece. That made it much easier to disconnect...
They're not that hard to do, but if the motors won't work at all that will make it more complicated. Pull the interior door panel/trim Tape...
Actually, some longbed trucks (like mine) got the 16 gal tank. If yours is a longbed, you can replace it with a 20 gal tank without modifying...
My C10 originally came with a 4.3/700r4 and 3.08s. 3.08s aren't great for acceleration/power, but they get pretty good fuel economy. If you're...
I wouldn't go by kbb for our trucks, it really depends on if its what someone wants and what they're willing to pay for it. I have seen people on...
Been awhile since I've seen a '78-'81 truck w/ pw in the salvage yard and they were basically the same, but I think they had a slightly different...
Sahadley, looking at an old reman motor I have, the gear actually looks pressed on (tried taking a pic, but my camera couldn't focus close...
Separate names with a comma.
