Hey Masher, Had the same trouble with a friends 3/4 ton a few years ago. He also went to the 9" Ford rearend for the good gear ratio. We...
ChevyDuty's online store has the die cast metal trucks for 50 and 51. Check those out. DrMike
The 265 and 283 will bolt up to the T350. You may have to modify your driveline and will need to add the tranny mount. Mike
Haven't dropped the frontend of mine but have changed out all the springs and shackles. Replaced the shocks with just plain old heavy duty ones...
Pretty simple. The crossmember has two caps that you have to bolt to the frame. Slip the caps on the tubethen bolt up the engine mounts. Once in...
Hey Brian, You won't find such a thing on the ChevyDuty website. The arm rests can have their color changed by going to place that sells...
Had mine done by a local auto upholstry person. He did my seat with a vinyl and fabric combination, carpet and headliner all for $300. If you...
Bob, The problem can be as simple as the starter getting too hot due to your exhaust or the brushes in the starter being too worn. Both can heat...
Glad to hear that was the problem and not the heater core. They can get expensive. Keep the thing flushed out every once in a while and it...
If you want to keep the truck stock, just buy the springs, shackles and bolts from Chevy Duty. I did this route with mine a couple of years ago....
Welcome to the forum, Sounds very much like a plugged up hose and not your waterpump. Easy way to tell is to remove the hose at the firewall...
RE: GMC 305 V6 Hard to find par Hey Russ, Yes that was a very good engine and a powerhouse of one at that. They were used only in GMC...
Had the same problem with mine before putting an auto trans in it. Sounds like your shifting linkage under the hood at the top of the steering...
RE: small rear window 58 chevy apac The smaller piece of rubber that is being talked about is called a lock bead. It should have been part of...
I had my seat redone a couple of years ago and had a combination of vinyl and fabric. The guy did a primo job with the seat and also did my...
The only thing you should put between the leafs of the springs is the poly lining sold by CD. Painting them will cause them to rust faster and...
Looking for a good used set of rear bumper brackets for my 58 stepside. If anyone has the design specs, I have the source to fabricate them....
RE: How to remove hub from brake dr Try loosening the adjuster on the brakes. Your shoes may be tight against the drums, not letting you remove...
Had a fire in the engine compartment a few months ago and now I have to re-paint. I found that a bunch of the paint on the dash bubbled up...
You are probably talking about the hood bumpers. Check out the online store under the cab parts/hood and fender sub catagory. It is part #...
Separate names with a comma.
