Remote fill I installed a remote reservoir so I could check the fluid without laying on my back. Made a quick bracket, did not used the clear...
Plumbing Completed Here is where this project is now. Completing the plumbing and new connections, The first picture is the braded 3/8 vacuum...
What Bill said I found that most of my electrical issues were related to poor grounding. With everything painted bare metal in a priority. I will...
Well, The internal combustion engine or an electric Chevy, this ant no stinking Volt, I found it interesting, "hey honey what's our...
master installed spent about an hour on my back installing the master cylinder, follow instructions workout well, need to remove my cross member...
My Guess Bulldog, My guess is the dash, and maybe the start button location may be different. I know I have a Chevy 1959 cab and used 1958 GMC...
Moving on The rotors and hubs are attached, I had the special pins holding the calipers on backwards. The stock 16 inch wheels do not fit so a...
Installed rotor This look nice, and the C-10 rotor and disc should stop this 3100, next the master cylinder under the floor. I will soon find...
What help Me with Overheating I think it was Nat, that asked me about my water level, and I filled up to much and did not have room to circulate...
Moving foward I assembled the hub to the rotors and installed the Barings. Installed the new bracket on the spindle. New parts on an old truck so...
Day Two Removed the dust shield by drilling out the rivets, baring's fell out and I drove the races out with a large punch. Clean up everything,...
First Day Brakes Today, I took the drums off and separated the hubs from the drums, grinding out the three pins holding everything together.
Small is for the rear http://mbmbrakeboosters.com/index.php?option=com_content&view=category&layout=blog&id=8&Itemid=16 If the link works I...
This may be helpfull I plan on disc up front with rear drums, cylinder located under floor. This link has some information upgrading from the...
Could be There could be a DoraMax Diesel under that hood? and that is a 59 emblem. Could be parts of a 38 Apache short fenders, either way loads...
Found this picture on the internet, Looks like a 1958 front clip and rear bed on a Silverado cab and chassis. See what happens with time, tools...
Question If this is a power brake setup, and located under the floor, I guess I have to run a vacuum supply from the manifold to under floor...
Some good info If the link works info on brakes valves etc....
Ready For the Install I located my CPP front disc brake components, had them for over a year. I did notice that a portioning valve looks to be...
Tires If it helps I went to a truck tire shop and got 7.5x 16 which are tires for a RV type vehicle, radials rated for heavy loads, MS. brand is...
Separate names with a comma.
