they SURE do !! ;) dv
Like the man said, you should not need an additional electric fuel pump. 4-7 is correct for a carburated engine and a pressure regulator should...
Read THIS-- http://www.thirdgen.org/hei Check the plug gap and see if you can identify where the HEI came out of. Computer controlled car ??...
Well Executed !!! and welcome to the forum !! dv
Timing !!! and probably a tweak on the carb adjustment too.... Drag out the tach & dwell meter !!! dv
Stay with the late model Chevy or GMC trucks and it's pretty much a bolt-in. Some new drilling may be required. Two things though. It seems you...
"... lasting 4 hours, seek medical attention..." I'm not seeing the problem !! ;)
Just get it centered ( left to right ) and measure from the fender lip to the tire. Have the rear on jack stands under the axles to place the...
I believe it will. The difference between the 64 and 65-66 was where the upper mount was located on the left frame rail. If you can, verify...
THIS is what you need. [IMG] Can be ordered HERE, halfway down the page... http://www.gmcpauls.com/Suspension.htm
The 7 inch booster should be fine if it's working correctly. The first thing that comes to mind is the thrust rod off the brake pedal assembly...
The Fenton stuff has been around for years and is tried and true. Once the carbs and timing have been dialed-in you should see a nice improvement...
Beautiful work !! Cold light ??? Swine Flu ??? ;) dv
Yes, but be prepared for 10 mpg !!! :eek:
Thanks !!! ( but NO Thanks !! ) ;)
Try the FRONT Sway bar from the folks at the link above. With new springs, shocks it will make a huge difference. Also, a basic front end...
Sorry,, no pics. Yes, some of the rubber sticks out from the sill. I learned the V cut thing from the assembly manual I had.. (?) V Cut...
You should start checking circuits using a probe light. Auto parts store carries them. Looks like an ice pick with with a wire and clip...
The best improvements in handeling with these trucks are seen after a modest lowering. Use 2 1/2 inch drop spindles with a one inch drop...
You probably have new weather stripping in the door openings, right ? First make sure you left a V-gap in the rubber under the sill panels. The...
Separate names with a comma.
