http://www.classicparts.com/1947-54-Gas-Gauge-Voltage-Reducer/productinfo/24-995/#.VYtq-PlViko [IMG]
The sender will go to the F post Power to the E post If your 12 volts and using a 6 volt gauge then use the reducer on the power side....
originally the park light will turn off when the headlights turn on. unless you modify the switch this diagram is from stovebolt.com [IMG] it...
[IMG] [IMG] [IMG]
the brake arm will not use a bumper, just the clutch if you choose to add a bumper to the brake arm make sure you clear the stop switch and...
If you get a hardware spring or the classic parts spring and it uncoils after a few uses then try this one...
[IMG] CLUTCH PEDAL PULL BACK SPRING 27-54 MPC Group 0.844, #3653144 (6" length X 50 coils) 47-54 FAM Sect 6, Sheet 4.00 BRAKE PEDAL PULL...
[IMG]
[IMG] [IMG]
47-48 channels were held on with screws Try a truss or pancake head self drilling.
No brace on the passenger side Inner fender bolts up with a piece of anti squeak gasket between. Not my picture...
Thanks I thought I saw one of the nuts backed off in the pic but wasn't sure
Sorry about your paint Reminds me of a something I read on another site. Guy was doing some welding He didn't notice the same type of...
NOS [IMG] [IMG] We're you in the middle of adjusting your valves when you took the pictures in the first post?
What year is your 235? Found this pic on the Internet You see the 216 on the right [IMG]...
Contact Marty He has all the keys I don't know if he provides this service but you can ask him....
good info on these two links http://www.madelectrical.com/electricaltech/delcoremy.shtml http://mightymo.org/Proj_OneWire.html#Delco
One last point on the new 12 volt fuel gauge. Sometimes....the new gauge will come with a needle that sits higher than the original. When...
6 is 180 from 1 4 and 5 are adjacent to number 1. With pointer on the ball on the compression stroke you should be under number 1 to start...
Separate names with a comma.
