I think your talking about the banjo bolt on the end of the master cyl. ?? If the banjo bolt wont thread in than I would call CP and see what...
I put the same kit you have in my 59. I'm thinking that I read somwhere that the bushings where supposed to float in the spindles. It all worked...
I think you will have to change out the bell housing, the non sincro transmissions had a differant bolt pattern. I changed out a non sincro unit...
The front axle from a 55-59 wont work on a AD truck. The frame on the TF truck is wider, and as Nate said the springs are wider as well. I think...
My 55-1st had vinyl in it, as does my GMC of the same year. Chris
Engine size You can find the engine size stamped on the flat area next to your distibuter. First three numbers. Could be a 228,248,270,302. Chris
Only one of those conections is for the vacuum hose going to the manifold. The others are for a windshild washer setup. I have a vacuum motor off...
If your lucky you can get it out with a magnet. Ive had a few break off and was able to get it out with out to much trouble. Chris
I've never seen a coil wired like that before. The reason for the resistor is to drop the voltage to around 8 volts. Resistor should be on the +...
Zig, Buy new U-bolts when you change your front axle, CP has them-5 bucks each. Old ones are always rusty and pitted-weak. Oh yea and there the...
Bendix or Huck? If you still have the original bendix brakes on your truck, all the parts are available. I put new drums and wheel cyls. on my 54...
Forgot to mention that the outside spring measurment was the same for the 1/2 and 3/4 ton trucks at 28". Chris
Spring widths?? I have 1/2, 3/4 and 1-ton trucks so I just got done measuring the front springs. The 1/2 and 3/4 have 1-3/4" wide springs, the...
Hi Zig, I'm thinking that your back on track ditching the idea of the rear disks. Front disk rear drum is the right way to go, In my opinion......
These guys have a kit for 350.00 www.stoveboltengineco.com
Are you talking the rollers or the gear?
I had a 78 with dual tanks and it would die with half full tanks. Turned out to be the hoses from the tank to the lines. Changed out the hoses and...
I remember my dad talking about that many years ago..
The 3/4 ton tie rod ends are different from the 1/2 tonners. The 3/4'rs have a tappered end. You can put modern tie rod ends on your 3/4, but you...
Just to add to what Coilover said, If you can find a generator with the pump on the back. The power assist is a good way to go, there used to be a...
Separate names with a comma.
